IP Telephony and Phones

Hello, friends, help me.,I have configured the expressway c\e vX14 bundle package.3.7, CUCM v14.0.1.13900, IM v 14.0.1.13900everything works from the local network, cisco jabber connects, calls and voice passesBut from the global network, the chat is...

My mailbox and another test mailbox I have do send email notifications at 9:00pm for example. Others that have the same settings in Notification Device Details will not, and the email will be sent at 8:00am. Looking at the details they are both ident...

As per Cisco PLAR can be configure for sccp and sip phones but when i m trying to do on third party sip device sip dial rules option is not available.

hi expert,Cisco ATA 191 lose Web Access GUI after register to UCM 12.5Does anyone know why and what config cause it?  As soon as it register , then It is not accessible in Web GUI.I have enabled the web access and also set admin password on UCM page,...

If we have CUCM and IMP version 15 along with Jabber, is there any way to integrate Jabber with Microsoft Outlook so that users can place calls directly from Outlook? For example, by adding Jabber as a plugin to Outlook or through any other method?

I am a user.  A couple of years ago the company took our desk phones.  They said that we would get email notifications if anyone called our old phone numbers.  This may have happened once or twice.  Recently I have been getting emails from Cisco Unit...

Hello,I have the following in a TCL IVR 2.0 script on an ISR:for {set i 0} {$i < [string length $dtmfString]} {incr i} { set digitToSend [string index $dtmfString $i] puts "#### Sending $digitToSend" leg senddigit leg_outgoing $digitToSen...

Hello Folks, I am facing one issue with Incoming calls and looking for your support. Call Flows are as follows. Successful CallPSTN User (9XXXXXXXXX) -- PRI -- Voice Router -- MGCP -- Call Manager --- SCCP -- Analog Gateway -- Analog Phone. Failed Ca...

Hi team, Is there any way to disable Web Access directly on the CP-8865-K9 IP Phone without going through CUCM?Can you support me ? Thanks team,  

Hello,by default, CUCM only offers mail and msRTCSIP-primaryuseraddress as LDAP attributes. Is it possible to use a completely different LDAP attribute for synchronization?Thanks,-Sascha

hello - wanted to reach out to get an outside opinion on this.  We are forwarding our internal transcription number (4 digit) out to a 833 XXX XXXX number.  I had concerns that we had overlapping route patterns, as we are currently moving from PRIs t...

The Jabra and Poly compatibility guides have not been updated.   Does anyone have any experience on if the usual 3rd party headsets that work on 8800's will still work on 9800's?