Network Management

LMS 2.6 / RME 4.0.6We have a number of ASA's which have a tftp-server statement that points to an old tftp server. This blocks CW (at a different IP) from getting the config.I've been asked about exactly how the configuration collection process works...

I'm in the process of building LMS 3.1 and have to create several (~75) user defined groups.Is there a way to export the groups from my LMS3.0 server and import them into LSM3.1We have to build LMS3.1 manually. The databases on the LMS 3.0 system ar...

Hi,The C drive got fullagain and again after deleting unnecessary files. We tried to change the directory location to D drive.But the relocation got failed with the error plse find the snapshot for the same. Also restarted the Configmgmt server as m...

Hi,what is MIB , what is the use of MIB in LMS.what are the MIB values for cisco devices.where we upload these MIB values.what is the significance.also what is system object identifier or OID. AND WHAT IS THE USE OF SNMP WALK.RegardsVaibhav

Trying to add an Cisco Catalyst 2960-48TC-L to CiscoWorks. Our tech has updated this device with IOS Ver 12.2 (46)SE. Would this have impact on discovery?

We made a network refresh at a customer and introduced VSS in the core. In the campus manager (visualisation) the VSS system isn't shown correctly (question mark). Is there a upgrade needed?Thank you!

Hi,I have LMS 3.1 (upgraded from 3.0). The server is having public IP. When it was 3.0 the topology was working fine after upgrading to 3.1 it is not opening in client machine. The server is behind fwsm. I opened the ports 43242,42342. The server fir...

where can i get the Device package for ME-3400-24TS-A& the upgrade packages for 7613,7609&6513

Is it possible to only show devices to client that they own,so client pietersons can log onto http://CiscoWorks:1741 access their device group "pietersons" I did found a way to make the groups public or private, but then the tab all devices is still ...

Dear friends!I am trying to plott mrtg for CPU and Memory Utilization of both (Active & Standby) SUP7203B on Cat 6513.However while trying to retrieve OID through walk.. i am getting output for only Primary SUP.. Attached is the snap shot for it......

Hi Experts,Pls advise how can I solve the two errors captured in the screen shots.RegardsYS

Hi, Iam trying to configure my ciscoworks VMS 2.3 to align with IOS IPS in my 7206. However Iam not able to configure my VMS for the same. I would like to have informaion on the following.1. Is there any possibility that VMS 2.3 does not support IO...