Hi, Is there any external interfaces/ CLI / API available for Cisco Security manager so that user can call these to configure end devices managed by CSM.
Hi,I am trying to limited the commands a user can use.I would like to limit the user to a singel "Show" commandSo I have done the following in the Per User Command Authorization section of the users accountdeny unmatched commandscommand = showargumen...
My remote site customer is running LMS 2.6 on a Solaris 9 system, and consistently has problems getting configurations for certain devices. To debug the problem they watched the traffic for a device that they received a good config file and the traf...
I am trying to upgrade from 5.2 to 5.3.CNA displays window ERROR:APPLICATION UPDATES X unable to connect to cisco.com OKI got this by APPLICATION UPDATES. I checked the PREFERENCE and I'm not sure what the paramters should be for PROXY SERVERS. I do...
CW LMS2.6 - dfm constantly needs a license validation to use features.I have an unlimited license that doesn't expire. Unable to update dfm from DCR.As per dfm:please run the CLI utility /opt/CSCOpx/bin/dfmValidateUpgrade.shThe license validation pro...
Within our implementation of LMS 3.0 we have specifically not provided SNMP write credentials for the purpose of security.This is because we have integrated LMS with ACS and if LMS uses SNMP write to make changes it bypasses LMS authentication and au...
I'm running CWCS 3.x, CM 4.x and RME 4.x on a windows 2k server with sp4. The problem is with my RME Weekly Config Archive. The job fails every week due to devices that are no longer managed by CiscoWorks. These devices are aironet access points t...
We have a valid vlan, 450, in use in one of our buildings. This morning we received a message stating that the this valid vlan was inactive. we received the message under user tracking this message 'Inactive 450'. What would be the cause of this? Ho...
Anyone know if there's a hotfix for this bug?------------------- Campus Manager 5.0 in LMS 3.0 cannot access devices via SSH/TelnetSymptom:Go to Topology Services in Campus Manager 5.0 and then right click on a device to try to SSH or Telnet into a d...
I see disappointing performance on our Netbackup master where clients are transferring data at a rate of between 5-6MB/sec where all the equipment supports gigabit speeds.We have a secondary Netbackup master that sees speeds of 25MB/sec or so from th...
Am using cwcli to get response from the devices and performing POST request. Need to know that can i execute cli like "show version" on end devices managed by ciscoworks.
