After a configuration deployment to >400 C3750's via CiscoWorks, some evidence of the process remained on >40% of the switches after the deployment:ACC-XX-XXX.XX#sh usLine User Host(s) Idle Location1 vty 0 SSH Proce...
After a configuration deployment to >400 C3750's via CiscoWorks, some evidence of the process remained on >40% of the switches after the deployment:ACC-XX-XXX.XX#sh usLine User Host(s) Idle Location1 vty 0 SSH Proce...
Hi,I need to upgrade the IOS of my 6509s from sup-bootflash:s72033-pk9sv-mz.122-17d.SXB8.bin to something that allows me enable "ssh v2" and Decnet routing/bridging. 1. Can anyone advise a suitable IOS?2. What issues & concerns are involved in upgrad...
I have configured my cisco devices to authenticate administrators againts active directory using IAS. But I would like IAS to publish the appropriate privileges at logon."privilege exec level 7 write memory"I would also like to centralize my access-c...
Campus Manager 4.0.4 - when looking at a subnet with topology services, if the router has a sub-interface it is never drawn as being connected to the switch it is plugged into. Even though it is clearly seen with CDP?? Is this a bug with this versio...
I am wondering if there is a way to adjust the map links after modifying the position of icons on the map. I moved things around and the links will not move so the map is very busy.
Could someone please advise me on where i can find information on what steps to take whenever i receive the following SNMP Alerts (maybe a step by step troubleshooting doc.):ciscoRasTooManySessionsciscoRasTooManyFailedAuthsciscoRasTooHighThroughputci...
What is difference when RME fetch config. I have two kind of devices. Telnet and SSH switches. If i dont enter primary credentials(CS) in telnet switch config fetch fails. In ssh switch i dont have to enter primary credentials. Fetch is OK without en...
We have a problem when we click on the Trunk VLANs Mismatch in the Discrepancy Report. The message appear:<<Error while loading. Campus Manager Server may be down.>>We check the status but CM is up and running. Thanks for any help or hints
When you add devices to the Ciscoworks 2000 inventory there are options for Local and TACACS usernames and passwords.How does Ciscoworks know whether it is being authenticated against TACACS or locally configured parameters
I was installing DFM 3.0 on a server and received an error message saying that there wasn't enough memory. 4096k was requested but I only had 4094k available. The installation went fine. Should I be worried about this? I have 526 devices. The ser...
I am trying to restore the backup data of LMS 2.5.1 on LMS 3.0I used the restorebackup.pl script after copying the backup folder from the 2.5.1 server onto the 3.0 server. Both servers are windows 2003 server. The command i typed is:C:\Program Files\...
I have set up SNMP V3 on the devices that are being monitored with LMS 2.6.After that I have rediscovered to populate the Engine IDs and updated all credentials adding SNMP V3 credentials.All that I could see was fine except the Spanning Tree VLAN Fi...
Seems CSCsb07389 has been made non-public. Can anyone post the workaround for this bug using an ad-hoc NetConfig job? Thanks.
With the authPriv user if you don't explicitly assign a OID to that user then is it a "this user can write to any table" type thing? I was just kind of curious how that worked. Thanks in advance!
I have installed Cisco Network Assistant and I discovered all of the devices in my network. However, some of the devices that should be linked are not linked by lines in the topology view. How do I manually add a link between devices? I've checked...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-08-2024 06:18 AM | ||
10-03-2024 12:07 PM | ||
09-19-2024 08:55 AM | ||
09-18-2024 05:45 AM | ||
08-21-2024 03:45 AM |
User | Count |
---|---|
3 | |
3 | |
2 | |
2 | |
2 |