starting inr RME netconfig jobs I get:"Error occured while processing.Possible Cause: URN_NOT_FOUND : urn "JRM" : Not found !!"( I had the hope that this version would fix at least 1 of my old problems - but instead I got more...)
We had defined many routers into the BBSM, each of them matching a specific client class C subnet. On that router we defined a null switch. That setup used to work well except BBSM becoming to take more and more CPU when we had a router.To ease the c...
When polling interface statistics with Getif and mapping the VLAN stats to the interface stats, I do not see correlation between actual traffic created and verified on VLAN IfInOctets or IfOutOctets. Polling the interfaces themselves is accurate, bu...
Hi,We have two PIX 515E firewalls working in HA mode.I wanted to configure telnet access to firewalls from outside interface.PIX version is 6.3(5)I kept PC outside to outside interfaces.PIX outside IP is 10.10.200.3, inside IP is 10.10.202.5 correspo...
I know that DFM processes SNMP traps. Do any of the other CiscoWorks applications process SNMP traps? Specifically do RME or Campus Manager do anything with SNMP traps? Is there ANY reason to send traps to me RME or Campus Manager servers. I run each...
Hello,we are using RME3.5. Now we have problems adding new devices into the inventory. In /var/adm/CSCOpx/log/dmgtd.log we are getting such errors : "Sep 28 07:07:06 d22sun56 IcServer[5790]: [ID 234696 local2.error] PGM_NM=IcServer:1627:TYPE=IMPAIRED...
Hi,I have an ACS 3.3 Server for authenticating local users username@localcompany.com .I am trying to configure the server to proxy requests for remote users to an external Radius Server. username@remote.comI created a distribution table entry that ha...
I have enablied netflow in the MSFC and supervisor engine. when I put show ip cache flow in MSFC the destination interface is shown as null. What I am missing?
My CiscoWorks is the windows version and I have three problems here: 1. all devices runnning IOS 11.x are not discovered completely.2. Newer devices running IOS Version 12.x are discovered but they just appear as a green box with a question mark.3. M...
Hello!We are running Cisco LMS and HP Network Node Manager on two different (isolated) servers, it does not work to forward my TRAPS from DFM to NNM, and also, is there a particular MIB/ MIBS to install on the NNM server to interpret LMS "messages"? ...
I have two identical 4506 switches with regard to IOS 12.2(31)SG, bootstrap 12.2(20r)EW1 and module types in slot 2 of the chassis. While trying to write a scrit to pull the serial and type of each card installed I ran into the following. (GOOD)snmpw...
Is there an OID which return the amount of RAM? I found one CISCOmem5minUsed=1.3.6.1.4.1.9.9.48.1.1.1.5.1 which gives me the amount of used memory pool but its about ROM. Thank you in advance
