Network Management

Since the upgrade to LMS 2.5 we cant get the configs for the AP1210's. LMS 2.2 did this without a problem.Tftp from AP's to server works fine when I use my own tftp server and manualy start the tftp upload on the AP.Seems RME doesn't know how to star...

I try to collect all the hostname's end ip numbers from Ciscoworks. But none of the reports are usefull.Is there a way or tool to collect the ip number and hostname? I need this file to put all devices into DNS.

Folks, Has anyone used MRTG with 6500 cisco switch. I am trying to configure MRTG to work with 6500. It connects and does not complain, but when i look at the charts they all have no data in them???do i need to send a certain trap from the 65...

Hi im doing a fresh install on a properly patched solaris box that used to run Cworks fine. It was uninstalled and removed from /opt.New install produces the following error every time when running logged in as root. I have looked every where and c...

Hi, I am using RWMS and VMS on the same machine.The ACLM is installed on Windows 2000 server,the client is Windows XP with IE 6.0 with JRE 1.4.1_02 installed.I have tried to apply(download) some ACLs on 7200, 1760, 2600 routers, but after using Job D...

hello,I would like to get a massage from the portchanell to the Netview, in case that one of the ports of the portcahnell fall.We have CISCO 6509 with ios: c6sup22-dsv-mz/121-22.E2Thanks for your help

Unable to discovery Cisco IP Phones. when i a do a search for a mac address of the phone using Quick Report ( end hosts(Yes is see the device) and for the IP Phones(No i do not see the device)). Does any body have this problem?

Hello,I work with RTR on Cisco 3640 with c3640-is-mz.123-8.T6bin. I generated entry:rtr 111 type tcpConnect dest-ipaddr 10.1.1.1 dest-port 25 control disable threshold 100 tag smtp-test frequency 60rtr reaction-configuration 111 timeout-enable thresh...

I have just set-up a cluster, but when using cw2000 it can only see the switch with an IP address asigned to the commander switch and none of the cluter members. Does cw2000, campus manager version 3.3 support clustering? Thanks,Andy

Hi all,I have configured NTP in my router, and it can sync the time with the time server. However, when the power is being reload or power off and on, the time of the log which recorded the reload or shutdown events shown the incorrect system clock. ...

I'm not at work right now and don't have access to a CiscoWorks box and was hoping someone could answer this. I'm not a programmer and certainly don't know php but I was hoping I would be able to launch a browser on the CiscoWorks box that is actual...

Does the RTR reaction configuration command "threshold-action consecutive" support ECHO (a.k.a ICMP ping) operation?I know it works on jitter operation, but not sure ifit supports a simle echo (icmp) operation.What I want to achieve is to setup a SAA...

I know the standard for 'normal' will be vary from customer to customer. But is there any general guideline on setting the SNMP thresholds? Such as 'what percentage of CPU/memory utilization should be considered as an alert? and what percentage fo...

Hai all,When i try to upgrade the IOS for 7204 VXR Router it failedrcp and tftp both failed.Even i allowed whole IP for both the router and ciscoworks server.But what goes wrong i was unable to find it out.Please clarify JOB ID - 2...

Our ISP has put a 1711 router in place of MS ISA 2000. We host a website that was available to external (web) users as well as internal (lan) users that was accessed by IP. The new router will not enable internal users to type the IP to access the si...