AIR-AP1852I-E-K9 cisco access point not working, red light flashing.i have some logs please help me ,,, thank you
AIR-AP1852I-E-K9 cisco access point not working, red light flashing.i have some logs please help me ,,, thank you
Does anyone happen to have any experience with disabling the Local Status Page on their Meraki setup? I noticed that their article (link and snippet below) states that disabling the status page may require a hard factory reset of the devices should i...
I would like to query firewalls to track VPN tunnel traffic count. Can anybody tell me why this happens? $/usr/bin/snmpbulkwalk -v2c -c xxxxx -Pu -OQUs -m CISCO-IPSEC-FLOW-MONITOR-MIB -M /var/www/mibs/cisco 'udp':'192.168.1.254':'161' cikeTunnelTa...
HI, We have a number of Cisco ASA 5505. Running 9.1.7(4). All Security Plus. FW1 - IPSEC tunnel polling working /usr/bin/snmpwalk -v2c -c *** -Pu -OQUs -m CISCO-IPSEC-FLOW-MONITOR-MIB -M /var/www/observium/mibs/rfc:/var/www/observium/mibs/net-snmp:...
I have been trying to establish an SSH connection from my EVE-NG Ubuntu station to an image of a Cisco Version 15.9(3)M6 router and I keep getting the error "no matching key exchange method found. Their offer: diffie-hellman-group-exchange-sha1,diffi...
I have a cisco 3945 router on which I am attempting to monitor several IPSec tunnels using SNMP. Specifically I am using CISCO-IPSEC-FLOW-MONITOR-MIB to do so. I can use "cikeGlobalActiveTunnels.0," for example, to monitor the number of isakmp sas ...
HiI have Cisco Firepower 2110 and I want to monitor VPNs I tried (CISCO-IPSEC-FLOW-MONITOR-MIB) it didn't work for me I tested it as shownsnmpwalk -v3 -l authPriv -u USER -a SHA -A "PASSWORD" -x AES -X "PASSWORD" 10.10.10.10 CISCO-IPSEC-FLOW-MONITOR-...
I have cut at this multiple times and have not been able to work it, so any help would be greatly appreciated.I have a 3650 with one interface connected to our ISP's router and another interface connected to our UTM and the internal network. I want ...
Hello Team,Hope you are all well.I have this challenge when i try to run a playbook to back up network devices.am attaching the playbook config and the error.- name: AUTOMATIC BACKUP OF RUNNING-CONFIGhosts: Core_Switchgather_facts: trueconnection: lo...
Bonjour, Je dois mettre en place une interconnexion entre un MX64, un PABX et une Livebox 100 Orange, pour que depuis le réseau interne on accède au PABX et donc à la téléphonie (logiciel de Softphone), mais également depuis la connexion VPN via le M...
For those SLA probes that support one-way delay statistics, e.g. UDP Jitter, does the one-way delay measurement always require a Cisco endpoint using ip sla responder feature?Thanks!
I need to log only the input of some commands and some events (for example, a successful / unsuccessful user login). Is it possible to filter generated EEM logs using TCL script and send them to an external syslog server? I wrote a script and set up ...
Hello, I need find the SNMP MIB for monitor my users connected by VPN SSL on my Cisco ASA 5525.I don´t know if this it is possible or no.Any tip about where I can find this MIB please post here.thanks
Hi @All I am trying to monitor Cisco ISE device in a NMS, while SNMPv3 configuration of the ISE device i asked to specify the host(NMS) Engine ID. Does Cisco ISE device does not supports automatically discover the SNMP manager engine ID during the in...
Hi I wanted to enable my ISR Firewall in addition to my FPR Firewall and wanted to check and verify this would be safely implemented and didn’t miss anything.My main interest aside from blocking everything I don’t want in was to allow each network In...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-21-2024 03:45 AM | ||
08-18-2024 09:11 AM | ||
08-16-2024 07:00 AM | ||
08-16-2024 06:26 AM | ||
08-04-2024 12:47 AM |
User | Count |
---|---|
5 | |
4 | |
2 | |
2 | |
1 |