I have got Prime upgraded on my secondary server, however to do so I had to make it a primary. Now I cannot seem to make it a secondary again by using the shell command. What am I missing here?
I have got Prime upgraded on my secondary server, however to do so I had to make it a primary. Now I cannot seem to make it a secondary again by using the shell command. What am I missing here?
Hello, i need some help by creation of a compliance audit job on PI 3.0. Probably i misunderstand some point, can you please take a look? To be clear, this is just an example, so i don't need a workaround for this case, rather I'm going to configure...
Welcome to the Cisco Support Community Ask the Expert conversation.This Ask The expert Session will cover questions spanning Cisco Prime Infrastructure on Implementation and Deployment on Wired and Wireless. This will be more specific to Customer’s a...
Hello, I'm trying to setup a mechanism to control/interact with the mobile router (IR809G and/or IR829G) based on tcl scripting. I found some information about this kind of operation(s) used in the past for other Cisco routers on the internet: https...
Hi.. I am facing issue in WS-C3850-48P switch for inband connectivity when I enable AAA in the switch with tacacs authentication as its not working at all. Is theer any bug with this switch or the software we using? Software Used : cat3k_caa-un...
Perhaps i'm being dull but theres not a lot of information out there on collecting syslog events, maybe because its really easy. I'm not sure I understand the concept here in Prime, my question is, out of the box is prime set up as a syslog server? i...
I am looking for a catalyst switch for a home lab/ 3 apartment scenariowhich would allow VLAN's and give me the possibility to learn more aboutnetworking. As an example, I found the following used switch on ebay(Cisco Catalyst 3750G WS-C3750G-24TS-S1...
hello all, I'm not sure if this is the best forum but it seems like the best fit so I apologize if there is one better suited. I have had a handful of air-cap2702i-a-k9 access points donated to me and I would like to play around with them to get some...
I know there is a lot involved, but from a networking perspective, what is the best way to start building a new hub network/site that will replace the existing hub/site while keeping all IPs the same once we completely fail over. All remote sites an...
So I'm reading about using LLDP with EEM but what I am unsure with is how do you define what it should be looking for? For example, have it so the listed configurations in the EEM applet will only apply to interfaces with a phone, not a PC etc. Is th...
Hallo, I have the following prolbem. If I access "Inventory->Add/Import/Manage Devices" I got this error: "Error in communication with DCR Server. ..." But the DCR-Server is running. I have tried something to solve the problem, check some files...
I will be meeting some an ISP at a new site where we need a connection. Excluding bandwidth, type of line, etc. what are some good things I should know or have knowledge about when the ISP comes out to site survey the location. I have done a quick si...
With Damien LimWelcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about how Cisco Prime Network Analysis Module (NAM) can assure services in an Enterprise or Service Provider via gran...
Hello guys, in advance thanks for your help. I am having the following problem, CTMjrmServer is not starting, i have enabled debug for the application and when i look at the log i am getting the following: tail -f CTMJrmServer.log[ Thu Sep 28 12:04:...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-07-2024 06:32 AM | ||
10-03-2024 12:07 PM | ||
09-19-2024 08:55 AM | ||
09-18-2024 05:45 AM | ||
08-21-2024 03:45 AM |
User | Count |
---|---|
3 | |
2 | |
2 | |
2 | |
2 |