hello, community.today i was doing some nm tasks using snmp and suddenly i have a question.I'm trying to query the 3G WAN module, for example c3gModemState which has the OID of 1.3.6.1.4.1.9.9.661.1.1.1.3so i didroot@linux:/# snmpget -v 2c -c public ...
Hi Experts,Please suggest how to configure the QOS statistics report in Cisco prime infrastructure 1.3Let me know is there any reference document which will be helpful to configure QOS in Cisco PI.
Dear Cisco,I'm a CCNA beginner, and I have a simple query please:Why can't I ping two devices (connected to the same network) simultaneously at the same time?I will make my question clearer by an example, suppose that two personal computers a...
HiIn Cisco Prime Infrastructure, where can we find the snmp trap logs and can we do the snmp polling through webconsole, please suggest how we can troubleshoot if the device is not reachable, do we need to login through ssh and check or is there any ...
LMS4.2.4 TopologyView is the 1st version that requires JRE1.7 (1.6 before), by means the special Cisco bundled JRE image jre-7u21-windows-i586-p_withjacorb that tries to install 4 jar Files in a system folder.This is only working on the LMS server lo...
I am trying to configure a performance poller threshold for CPU utilisation (5minrev).While doing so, I am facing following issues:1. When the poller template (CPU utilization) is selected, no MIB variable is visible for further configuration.2. In t...
I am using an object tracker to trigger an EEM applet to bypass a device when the object is not reachable. The bypass is achieved by changing the dot1q encapsulation on the 174 sub-interface to 175, the default encapsulation for this interface is 17...
Hi allIm looking for some software to basically give me availability management, performance, netflow, syslogs, snmp etc for a large number of deviceswhat is one of the best solutions for this, none CiscoI have been looking at solarwinds, netscoutAre...
Hello everyone, this time I have an issue with LMS Prime.Time ago, the LMS Prime was configured with an IP address for SMTP server (10.100.20.82/16); then, server managers changed the IP (new IP is 10.100.20.120/16). As you can imagine, I changed the...
Hi guys,I am looking at a task of defining the port usage of a Prime LMS 4.2 installation, and I found the URL here:http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/install/guide/prereq.html#wp1075786The page contains a...
Hi all,I config the ipsla jitter to monitor the voip traffic between german and hk. However I get the following statistic that the SD and DS are unbalance. Could anyone know what the issue is ?Thanks Leung Che Man
I'm using LMS 3.2After discovery only the Backbons switch is reachable while all other devices appear as unreachableAlthough I configured snmp Version 2 on all devices, and I can reach all tthose devices from the server and login with the credential ...
Hi,I am running a 1921 with c1900-universalk9-mz.SPA.151-4.M4.I have set up my ip sla for icmp-echo which is working well. What doesnt seem to work is binding a track to ip sla. Normally this would be acheived by the commandtrack 1 rtr 1 reachabili...
