Can anyone advise on the download location of LMS 3.2 Service Pack 1 please.I need to apply this to fix some issues we have, however I can find it anywhere in the download section of Cisco's Website.
Hi folks,I need to test failover scenario, can anybody suggest a software that i can send continuous burst and soft provide the report of packet drops and switch over delay.You input will be appreciatedRegards
Hello,First off all i'm new to Cisco Prime Infrastructure. So far i've got it up and running.My goal with Prime Infrastructure is to create a report of my port attributes, mainly to check the oprational status of a switchport (reclaim unused ports).B...
Hi,I came across an error that seems simple but I cant solve the issue. I could'nt pull the startup config from an AP via Cisco works so I connected to it and tryed to do a show startup-configuration. But when I did this, the following error occurred...
I have a number of C3750X L3 switches, all running 15.0(2)SE2 images. I configure an enable secret and telnet password and all is well when I log in. Then I create a local account and configure my RADIUS parameters. I can log in with my RADIUS cre...
Hi,I have Lms 4.2, Can anyone let me know is it possible to view the interface utilization (historical & live) in megabytes or kilobytes.? (not in %).regardsRajesh
In *nix this is as simple as "wc -l" but unfortunately I can't seem to find a simple solution. For the purposes of this thread here is my test script...event manager applet TEST authorization bypass event syslog pattern "TRIGGER"action 1.0 cli comma...
Can anyone please explain in DFM what is the difference between pdshow (for DFM processes) and brcontrol?? What do they tell and what information to interpret from their output.-ThanksJoe
Hello,I have many routers Cisco 2901 and one router 2951 with IOS version 15, and some days ago these routers are having high CPU every 10 minutes caused by the process SNMP-ENGINE, I have three snmp servers in my network. How I can fix this issue.Th...
Hi folksI've been away from the Cisco scene for a while and now that I'm tasked with a network redesign project I realize most of my old tools are end-of-lifed. So I'm reaching out to the community for some tips.My new network will be some 10-12 Cisc...
Hi all,I'm new to eem scrpting.I need to know if it's possible to write a simple script on a DHCP cilent used for a backup in a Call center.If power is lost or a connection it lost to the WAN interface the address will change from time to time. It do...
