Other Collaboration Subjects

Have loaded 3.2.2c SPe and am getting the following error when trying to add a new user : Error- the following error occurred while trying to load the requested page : Couldn't create user object. Any one experience this before? If so, any ideas as ...

Hi,Is someone know if it is possible to have the callerid displayed on the IP phone when the incoming line is analog, FXO port on a VG200??If yes, what are theminimum requirement version on all the equipement??ThanksMarquis

Hi,I want to activate caller ID on the 3660 router with IOS 12.2 so that the calling number will register on the ip phones. I already have the configurations but I haven't tried it yet, before doing it I want to make sure if my configurations are cor...

I have a star network, GBIC connections from 4908G-XL to 3 stacks with 3548XL and 2900XL's. Each stack has around 150 users with a Class-C and VLAN. I need to implement qos for VoIP. should be no problem on the 3548 and 2900's they support 802.1p, ho...

I have a customer who are looking at replacing a current POTS system.The system needs to have 40 endpoints all linked together with the abiliy to broadcast calls over the whole system??A customer rings in to a number, if the local shop cant assist it...

MisterWhen I have call of Voice over IP crossing a MPLS Network , where both end has differents access , by example , in one end ATM and the other site Frame-Relay .Is possible to configure RTP Header-compression in both end ?I understand than the RT...

Hello, I have two sites connected between 805 routers. I have one ATA 186 in each site and want to connect it to a PBX, to allow to make calls between both sites. Is it possible ? Do it need any special configuration ?Thanks a lot for your...

I know that I am not allowed to install 3rd party software on my CCM except that specifically provided by Cisco. But is it permissible for me to install a printer driver (one that doesn't come stock with this version of Win2K) on the machine? Am I ...

Q1. Is a gatekeeper is a must in traditional VoIP network ( not IP telephony ) consisting of 3640 at head office with PBX hooked and branches with 1751-2V with analog phones attached.Q2. If it is a must, can we deply the gatekeeper function at the h...

Can you install the Cisco Conference Connection Software on the ICS 7750? I am assuming you can it but I do not see it on the website were it has been done.

Are there any providers or NAP's that only carry VoIP traffic? No other IP traffic on those pipes...

Can the Cisco IP Softphone to be operated on a PC linked to the main call manager site via dial-up asynch analog modem link ( with speed of 28.8K ) ?

I am very confused about something... I have been told previously that a Unity server will not work with Exchange servers at multiple sites. For a customer, we have rolled out a Unity server at both the first and seconds sites. When I go to add ne...

When I do a search on "Delivery Locations" and click on a location that represents one of the remote Unity systems, I get a message back from IE saying "Failed attempting to fetch default location ID" and I cannot view that delivery location. Any id...

I have 2 ata 186's that I have upgraded to v215. When I tested them in my office, they worked just fine. When I took them to the customer site, they were able to grab an ip address but wouldn't give me dialtone, nor would they auto register with ca...