Other Collaboration Subjects

After following the Cisco Webex Social installation guide for 3.0, the default admin:test@your_company.comtestis not an admin on the system. Consequently Account Settings link does not work and WebexSocial returns an error You do not have the require...

When I e-mail tac@cisco.com requesting support for softare like Prime Infrastructure 1.2 or Application Networking Manager, I got an e-mail with somehting like "A serial number is required to process your request for hardware replacement or support. ...

Hello,I have some problems to use the function "add asset" in DMM 5.4, the browser of the customer is Internet Explorer 7, I though that maybe the customer have some security polices in the IE and I tried it with a fresh installation of windows xp wi...

All,Will SAN/UCC certs work for the DMM, SNS, MXE & TCS?  I am pretty sure the TCS will accept a SAN since IIS supports them.  From what I have seen so far on the DMM & SNS they only seem to check the 'Subject' field for the CN, not the 'Subject Alte...

Hello there,I have Call manager 8.5 installed. If I restart the TFTP service on the PUB and SUB, will it effect the phones?

I need some clarrification about security of SNS videos. How secure SNS is?Is there any chances where someone can download the SNS Videos using some additional third party software or using some plugin?Is there any document where we can show this to ...

I have already added a bunch of phones to my call manager and the users are already in the system with their extention from syncing with active directory.How do I get the users and their phones sync'd up? I did an export- all details of all the phone...

Hi,I am in the process of installing CallManager 8.6 business edition and the customer has requested that we intergated with a Radvision video conferencing solution.Is the above possible and what would be required i.e. Licensing on the Business Editi...

Are the 7941G-GE phones different than the 7941G on how the startup works? Plug in the 7941Gs and they automatically run the startup, plug in the 7941G-GE and get no startup. Do they need a separate power supply to work?

HiAnybody know if an older CP-PWR-CUBE will fit and work with a 7941G ?Cisco recommends the CP-PWR-CUBE-3 in the user guide but the specs seem to be exactly the same.I just want to know whether I can just buy the cheaper CP-PWR-CUBE for my 7941G and ...

Hi everybody,Does CME support redundancy and failover to a second CME with SIP phone like Cisco SPA series.I know that CME has a redundancy solution for SCCP phones.The configuration for SCCP phones is done with:telephony-service  ip source-address 1...

Hi All,May I know how to break the dial tone when pressing any keys? I've tried to set the input gain to 0 dB, -1dB, -4dB and 4dB but same results.Voice-port also configured  in "timeouts interdigit 3". In other sites, same configured but it is worki...

Hello, I am running a proprietary modem  signal across  Cisco VIC2-2E/M cards (with microwave for transport). 4 wire circuit.The modem is a Motorola Astro Modem, it runs constantly. It is connected to a Motorola Quantar radio base station on one end,...