Other Collaboration Subjects

Hi when I make call from PSTN , My auto attendant is playing the greeting and promting the user to nter the extension or press 0 to reach the reception. But when the user press the 0 it's going to the voice message after few seconds. The Web Attendan...

HiI am using FXS module at one end (router 2621) and FXO module + FXS module at other end (3660). The FXO port is connected to the PBX with analog line. I am facing voice quality problem if FXS port connected telephone connects to the PSTN line via F...

Is it possible to configure the Call Manager so that an incoming call to an IP phone will also ring on an overhead bell that is attached to an FXS port? Has anyone done this? I need to find a way to make this happen.Thanks,Michael

Some of my phones have a limited number of ring types others have all 25. All phones use the same 7960 template. Have any ideas?

Hi,Does anyone know if there is a way to map an incoming call CLI number to the correct entry in the corporate or personal directory in Callmanager 3.1, so that on 7940 and 7960 phones you can see who is calling you? Just like on a mobile/cell phone...

We are using HDV card on 3662 to connect to a channel bank and then telco in Iran. the problem now is we can hear Iran side very well buy they can not hear us. however, another company is using a 5300 to connect to the same channel bank and their cal...

Hello,I've been testing the "Dial from Outlook" feature for some time and have had a few problems with it. I'm using CM 3.1(1), Unity 2.4.135, TSP 3.1.(025) with 5 instances, Windows 2000 SP2, IE 5.5SP2, Viewmail 2,4,5,73, and Outlook XP. My 7940's...

Would 50,000 users at one location(university),require multiple sites? or could several Unity servers be "clustered"?<br><br>Sprint/IP Telephony

Does VMO work with Outlook 2002 XP?<br><br>

I am experiencing intermittent probs with faxes and modems on a 24 FXS blade in a 6509. Some fax machines work great, other get connected on sending out and then error out. The same happens with modems. Is echo possibly causing a problem here? Anyone...

A site I'm working with has transfer issues (NEAX2000, D42NE2 digital voice boards, and MCI integration). Under Call Management/Call Routing, Live Record is there and grayed out. <br><br>Since Live Record doesn't work with Serial integration, could...

Hi,At a customer site we have a Alcatel Dec/t system for the mobile phone connections across a factory.We use Callmanager 3.1.2c and a 12 ports FXS module in a 6009 chasis.The Alcatel system is connected to the analogue FXS module on the 6009.The pro...

Does anyone have a working configuration for using H323 with a vg200 and FXO interfaces?

If a customer does NOT have Exchange or any other email can they use the Unity to get this capability?<br><br><br>

Using a VG200 to connect to an analog phone bridge. When a call is placed to the bridge it is answered and put on hold properly. When the call is sent to the conference it is disconnected 50% of the time. Reading some specs on the phone bridge whe...