I have about 200 users on two CCM 5.0 servers,the directory service keeps on hanging and becomes inaccessible and the service comes back after some time,any ideas as to the cause and remedies ?
I have lost the cd sleeve with message store 2000 CD key. as they are all the same key can some one send me the key of you CD sleeve, or where can I find this key on my unity server?Thanks
I have configured Extension Mobility by following the Cisco CallManager Features and Services Guide but when I hit the services button on the 7970 I only get plain html text, is there something I have missed out that should have been enabledCCM 4.1(3...
I thought that the main usage of digit strip was to remove the matched pattern for an outbound pots call. I run 12.4.XC4 with CCME 4.0(3), digit strip on a destination pattern of ^0T is not removing the 0 and passes the dialed number unchanged to a B...
Hi All;How can I configure "call-forward all" command on the second button on IP Phone? usually when press CfwdALL button on phone, automatically it chooses first button. thanksAlex
Hi I have the following topologyPhone --- PBX --- Router - SIP 1FAX ------| - SIP 2I'd like to know how can I redirect all de call originate from the analog Phone to SIP 1 and all the FAX call to SIP Server 2 without any using any prefix...
I am attempting to install this OS on an IBM xSeries346 (meets BoM requirements) but it is refusing to progress stating I need a 3.4cpu rather than the 3ghz installed.Any ideas?
I have a user getting this error message:Cisco Agent Desktop The agent ID is invalidHe is setup in call manager. His AD username is associated to his phone. His phone is associated to the rmjtapi user. He is setup as both a supervisor and an ag...
hi,below u can see my mgcp gateway config.its c2800nm-ipvoicek9-mz.124-10.bin.But i can not work srst on that router.I can not call pstn from PRi line. it alwyas give busy tone even my pri line works correctly with CCM.!!application global service a...
Dear Sir, I have installed Cisco CallManager ver 5.0(4) at server 7815-i (IBM) using Cisco Unified CallManager Installation Disk but when i have finished the installation & the system reboots, the server asks for login name & password, i have entered...
Hi,we have problem with Call Manager Express (ver 3.4 and 4.0). We don't see missed calls on the phones 7940 and 7960 that have overlapped numbers configured. The 7912 works fine. Phones 7940 and 7960 which don't have overlapped numbers also work fin...
