Other Network Architecture Subjects

I have 2 vlans on a single switch with the same IP address range (I must use the same) 10.101.11.0/24.the switch is connected to a router. I want to use NAT for both vlans with a single public address, how do I do it?

Dear All;I have Switch Cisco 4006 with Routing blade (4232-L3 blade); Witch configured for 3 VLANs, vlan 2 and 3 is picking ip address from DHCP server connected to VLAN3 I had creat one more VLAN (vlan4) and configured this vlan to pick ip address f...

I would like to upgrade an MSFC2 ROMMON to 122-17r.S1.Router#sho rom-monitor slot 2 rpRegion F1: INVALIDRegion F2: INVALIDCurrently running ROMMON from S (Gold) region1.Is this possible from Sup-slot0:?2.S (Gold) region is not upgradeable. Correct?3 ...

I have workstations in seperate VLAN's from our server farm. I have an intermittent problem with the workstations finding our Novell servers during login. When the user retries one or more times they will be able to login normally. The workstations a...

Hi guys, I want to know if i can cofigure the"set ip Next hop" command with an addres that is 2 hop count of the of the Route-map router.

What is the command to show status of LED's remotley?Not looking for show post but current status of led's.

i have two cisco 3750 switches which form a stack and a 3com 4226T switch. there are two parallel links connecting them, one end is for 3750 stack and the other end is for 3com switch. In the 3750 side, these two links are connecting to these two 375...

I'm having trouble working out what two messages that came up on one of our Cat6509's mean:2005 Apr 03 08:52:43 bst +01:00 %SYS-4-NVLOG:sys_check_nvram_blocks:Block 59 restored from NS. 0xBE002A48(0x9004), 0xBE004EC5(0x1)2005 Apr 03 08:52:43 bst +01:...

HI, i hav cisco 6509(with MSFC2) in my office & distribution switches as 2950-24T with IGMP snooping enabled, i hav enabled IGMP,mls multicast on the 6509 switch. then in MSFC2, ip multicast-routingmls rp ipinterface Vlan2 description "server farm"...

IOS SLB- is this separate version of IOS or it's a feature of standard IOS software (Desktop, Enterprise) ?

In trying to establish additional data vlans I've manually created and deleted a vlan. Now, the vlan I want to use shows up as deleted when I put in "show ip interface brief" and I can't get it to "undelete". It shows as 'active' when "sh vlan" is ...

Does an HSRP interface in standby mode forward multicast packets recevied from a multicast sender on a directly connected network?

Hello,My problem after upgrading my 4507 to the lastest software, is that the switch itself is having problems arping other directly connected switches. However, my PIX and VPN boxes do ARP to it, as well as a PC.Example: my 3550 and 4006 won't commu...

Dear All,I want to use set base CATOS commands in IOS...I know that there is some guide but now i am not finding it. So, please let me know where can i find the all set base commands convert in IOS commands documentation your true help will be highly...

I just want to double check, If the physical layer is half-duplex,,,,,will that affect the application layer (full-duplex) like MSN Messenger or Yahoo Messenger-----etc,(i,e is MSN messenger will be run in half-duplex or full-duplex) ? Is the applica...