Hello all :)I I have two routers connected to two eBGP (different) ASs and running iBGP between them.r1 ebgp 65000 ibgp 10r2 ebgp 65001 ibgp 10I learn route 69.69.69.69/32 from each ASs over eBGP, and then that gets passed from r1 to r2 and vice-vers...
The problem that i face is i will not be able to telnet into the 7200 router for a brief period of 20 -30 mins.After that the connection resumes automatically.On the ACS server i dont see any failed attempts.The router doesnt allow the console local ...
Hi,I have IGX 8420. Currently It has one E1 trunk, one UFMU(FR), and other UVM (Voice ) cards, .How many maximum trunks & FrameRelay connections & Voice connections can be added. Whats the maximum capacity.I will be please if you can give me the hype...
Hi All,I have tow routers frame-relay back to back and configuring bgp. The problem is that no bgp connection/routing update between the two routers. here is the confignterface Loopback1 ip address 10.0.199.1 255.255.255.255!interface FastEthernet0/...
Got a strange one here which I think might be a bug. Have an old 4 meg 2924 going to a new 2940 8 port switch . For some reason on the 2924 side I'm getting native vlan mismatch errors even though all ports on both sides are in vlan 1 . The ...
We currently are attempting to use the CISCO 3550 Switch as the head switch in our outlying buildings.There are two Gb connectors in the switch.One is to be used as a connection to the 6509 in the NOC and the other to a downstream Gb switch.We can on...
I have IGX 8420. There several voice connection & one FrameRelay connection and one E1 trunk. The FR class has %utl/%utl set to 60%. can I change it to 100%, without affecting the voice channel. %utl/%utl refers to what ? bandwidth allocated to FR co...
I just enabled Frame Relay IP TCP header-compression on sub interfaces on each side. The hub router I used the passive option on as the boss man had me doing it during production hours. Anyhow I ran thes stats in output interpeter and it did not supp...
Before xmas I added an additional cluster stack to the exiting network. This new cluster consists of 3 3500XL switches.Problem is that, On the middle switch, the port interfaces are showing amber leds when I patch in to it.The cluster command switch...
Hi,Is there any way to increase the console port speed on the 2940 switches? I have had on two occasions now, had to load a new IOS via console/xmodem due to the extracted IOS from tar file not being copied in correctly (have verified that they were...
Hi Sir,I'm a newbie to CatOS. Lately I'm working on few projects involving Catalyst 6509s (Hybrid).I'm curious; what's the best method to migrate CatOS config to another Hybrid box? My current practice is I configure every single line manually.Is the...
Hello,I have a 7206VXR equipped with a NPE-200 processor with 128 Mb of memory. When this box forms ebgp neighborhood with a bgp router of an ISP, and its routing table gets populated beyond 100.000 entries aprox, it gets blocked and reboots.I think ...
