Other Network Architecture Subjects

Hi all,We are some kind of little ISP. Our network structure can be simplydescribed as following.==========================================================Clients(10.*.*.*/16)--->Cisco6509(10.0.0.1/16 and 100.0.0.1/252)--->Cisco7206(100.0.0.2/252 and...

Does anyone know of some reading on advantages of the synchronization or disadvantages of it between RME and Campus Manager. I am really looking for a white paper or something.Thanks in advancepat

I'm using "ip dhcp address" command to obtain an Ip address from dhcp server. It don't work.I'm Using 12.2.12a , if I perform "debug dhcp detail" I obtain this output :DHCP: SDiscover: sending 282 byte length DHCP packetDHCP: SDiscover 282 bytesB'cas...

I understand how an IP Workstation can be an ES, but what kind of machines are CLNS ESs? Where is CLNS practically used in the world?

I have DFM 1.2 with IDU 1.2.3 installed, that supposedly adds new device support for 3745s. What level of 'support' is provided? What does 'supported device mean? I have added 5 3745s which don't appear in any default groups in the Admin Console or i...

DOes Port Adaptor in 7204 ( PA-4T+) support Frame Relay protocol ?

I have 3 IP addresses of a SMTP server. The hostname for these 3 IP addresses is smtp.mydomain.com. Is there a way I can do something with Nating that I will NAT the 3 IP addresses to one IP address presented to the users?Thank You

Hi there, I got a PC with an ISDN modem, which dial to a Cisco 3661 equippped with a CT1 modem. There are 24 MICA digital modem inside the Cisco 3661 router. There is no problem for ananog modm dialing into this Cisco 3661 router. However, I got...

I am trying to upgrade to CD One v5 and am having problems applying the patch that suspends all jobs before the actual upgrade installation. I have successfully applied "patch_1x_20.pl" which copies the DisableJobs.class file, but when trying to run ...

I have seen, in many design, a single server connected to 2 switches to avoid that a fail in just one switch stops the server. But, what in the server does make the interface fail over?Paulo

When I do a CV on a Cat 6513 , with native IOS , version c6sup22-dsv-mz.121-11b-EX1.bin , it shows as ? - - - -is this related to bug issues or cisco view. This GBIC is new , is there a patch for me to download

I need to temporarily disable a atm interface configured in a pvc range. The need for this is to suspend a customer for non pay without going out to the remote cabnet and pulling wires. The problem I am having is you can't get into the interface if...

I cannot seem to configure a port on a cat 6513/4006 Sup 111 - error appears - "No such name error on PortName5.21". Is it bug related or CV relatedThanxPSI also cannot see the GBIC WS-G5483 on the Cisco View of the 6500 - shows as ?

Has anyone seen this error before? Telnet: PGM_NM=Configuration Archive:6737:TYPE=unassigned message type::Failed to initiate telnet session, Cannot telnet to U152876_172_31_51_32 RCP: PGM_NM=Configuration Archive:6761:TYPE=unassigned message type::P...