Other Network Architecture Subjects

I am trying to setup two Cisco 2511-RJ45 router / terminal server devices that will connect to each other on TTY / line async port. For ex. I would like to be able to make line one of TermServer 1 connect to line one on TermServer 2. Here is what I h...

I still have a question about how to add vlans to the port-channel withoutit being disruptive. When I added vlan 62,63, and 64 I started with theinterfaces 1/1 and 1/2 on 6509A then did the portchannel 1 on the 6509a thenwent to the 6509b and did the...

Hi,I have 2 7513 belongs to core network are running HSRP. My core is consists of 2 wan router along with 3 7206 doing dlsw/snasw and 2 7513 CIP routers.Now my wan routers are connected to eight different regional office distribution 7513 routers. My...

I thought that I had read everything to get this working but I am at a stone wall.Have an existing 8850 with SMR-3CT3 card and AUSM-8 cards. The previous people had configured the first two T3 cards and they are all working fine. We are now startin...

Hi,I meet a problem when I've activated a New PVC : In this configuration : SIG_________Cloud FR________LYON-AA pvc (1536 BW) has been created between this two devices DTE.After this, LYON-A received FECN packets from SIG (all packets IN are equals ...

After entering my configuration on a cisco router 2509, when I reboot the device, I loose my configuration .So what i have to do to maintain my configuration.Thanks for your help !

We are in the process of uninstalling CW2k 2nd edition on our Solaris 8 server when we encountered a message "no new.depends file" We uninstalled RME then went for "all" but we get the aboave message. Can we go ahead and remove the directory or ????

I am hearing rumors of an "End Of Life Announcement" by the end of 2003. For the IGX Series any truth to this rumor...Thanks

what is the difference?

Why isn't debug apple an option in Cisco IOS running on a RSM in a Catalyst? IOS version is 12.1(9) and 12.1(8a)E5. What debug funactions can be done to troubleshoot an AppleTalk problem from the RSM?

I have three sites; Sites A, B & C. Sites B and C both have the a Cisco 1720 with a BRI port (one 128K ISDN link attached) will respectively dial to Site A which has a 2620 router with two BRI ports as required. Site A: Loopback0 - 10.10.68.1 E0/0 - ...

We have a Cisco 3640 IOS 12.2(5d) with an E1 PRI interface and a MICA modem card. Win XP client's should dialin either with ISDN or analog. All client's could have both, ISDN and analog connections active at the same time (I know, it's strange but tr...

We have a ISDN pri line in Seul connected to a router 2620 (MPC860) on which runs the ios c2600-js-mz.122-7b.bin. Here is a part of the router configuration : username xxxxxx password 7 xxxxxxxxxxxusername xxxxxx password 7 xxxxxxxxxxxcontroller E...

In my Cisco 2600 routers, which is the MIB variable that contains the number of in & out DE packets (the same as in the IOS command "show frame-relay pvc").Thanks in advanced.

CWSI2000 5th ed CD Campus Manager/UT version 3.2 I need to clean up the User Tracking Duplicate IP report, it is useless in its present configuration.I think my problem is mostly users with multiple NIC cards but not sure about that. I know these are...