I have to replace an a RSM module on Catalyst 5509 in product.It's arrive at me RSM module from RMA procedure.It has a PCMCIA card.The Catalyst is working with Ios loaded from slot0:Can I insert the PCMCIA of the new RSM , on slot1: and does it copy...
I have between 2 layer 2 segment Win2K Server, which route between.Within the seperated segments the VTP information works fine.How do I get the VTP information synchronized between the seperated segments ?brmarc
Can a Catalyst 3548 create multiple vlan on a single port with 802.1q trunk ? if yes how can i do that, if no what switch can do that function ? thanks for any answer
hi there,While doing some loop tests on serial interfaces in Cisco router, I noticed ;When the encapsulation is HDLC,the output of show interface is Serial3/0 is up, line protocol is up (looped) On the other hand,When the encapsulation is PPP,the out...
It isn't accepting the enable password... we don't have a TACACS server setup... Is there anyway around this? I keep entering the enable password for the switch and CMS just keeps coming back with a request for a username and password.
is it possible to generate multiple VLANs within a 3550 12T Layer 3 Switch ?of course it is...but i need to route between "VLAN 1 and VLAN 2 (Group1)" AND "VLAN 3 and VLAN 4 (Group 2)" but not between Group 1 and Group 2.Looks like two seperated rout...
I have a Catalyst 5500 and a 2900XL. They are connected with two 100mb fiber uplinks that currently work as trunks, trunking VLANs 80 and 88. I have STP configured to use each link as a failover should one fail:interface FastEthernet0/23 description ...
Hi,I've got a C4K with a 12.1.8.a version. I can't find a way to configure the out of band management port on the switch. Does that mean I have to use the in-band one and nothing else ?In previous releases, one could use the set command for the me1 i...
Hello, we are just migrating our NT-RAS Servers to CISCO machines. We also use Cisco ACS for athentication. My problem is, with the NT servers it was possible to let passwords for dialin expire, and the user got a box notifying him of that and that h...
I have a Catalyst 5500 with an integrated RSM. I have the supported hardware and software. We utilise VLAN interfaces on the RSM and have a VTP domain of "Joe". Could somebody please help me with the commands needed to configure MLS and anypossible p...
Kindly let me know who can I load IOS from a TFTP Server ?In case TFTP Server is not available due to network traffic, I want to load the the IOS from the Flash. What should be the command?In case both TFTP Server and Flash are unavailable, how can I...
Hi, I have two offices LocA and LocB from both these locations i have a link our parent company LocZ. ( Say LnkA and LnkB respectively ) My problem is to route a particular machine in LocA , which is trying to contact a machine in LocZ through...
Hi,I have loaded a new IOS on my 2501 and it seems that i can no longer run a break sequence to try to fix it.What can i do?Here is the output of my version:Cisco Internetwork Operating System SoftwareIOS (tm) 3000 Software (IGS-I-L), Version 11.1(4)...
We have a primary and secondary site which I need to span with the same VLAN structure (i.e. four VLAN's). The only type of WAN link available between the two sites does not support any form of traffic separation (i.e. not ATM or Frame). Can the VLA...
