I need to deploy on the core switches (2 Catalyst 4500 with supervisor 10GE) a redundant VTP server configuration.The solution is to configure the same VTP server on both switches, configure the same parameters and the same vlan on both switches: are...
Well yesterday i read in a cisco book saying that you should have a cross cable when connecting switch to switch & a straight cable when connecting workstation to a switch , but currently i have stright all through , switch to switch or switch to pc ...
helloI have to install mode conditioning patch cord cod CAB-MCP-LC and I find nowhere the technical spec for it.Can you indicate to me the type and number of connectors on each side ?thanks
The title speaks for itself - can it be done? The router has 12.3 IOS and a fast ethernet card.I need just two vlans, with only few clients to support on both of them.Thanks a lot for any help!
I have an interesting issue where a Cat 2924xl switch 12.0(5)WC9a is sending me traps even though those particular ports are not used.I admin down the unused port and I still continue to get traps on the NMS alarm browser. these ports don't have any ...
Dears,for UDP forwarding acress routers, do i have to use 'ip directed-broadcast' with 'ip helper address' & ' ip forward-protocol'. could you give me the configuration example.thanks
Hi . I have upgraded IOS for 85 switches in Campus area network from IOS c2950-c3h2s-mz.120-5.3.WC.1.bin to latest IOS downloaded c2950-i6q4l2-mz.121-22.EA4.bin.Switch clock settings changes to 1st March whenever any switch reload or power cycled.Ki...
Dear,How to connect the two EIGRP autonomous systems on single router. 1, mutual redistribution?2, BGPany idea? or any configuration example?very thanks..ikizoo
Hi guys and gals. Not pay attentiong while performing an update, I mistakingly confirmed an erasure of the flash system on my 2600 series router. The dreaded rommon> is returned on reboot. I tried to download the image files from Cisco.com but the...
Core:4506 x 4Access Switch: 2950 x 50i met a problem that almostly all of swich ports down and up randomly. connect with ports are lots kind of laptop and desktop. In one week it appears one or two times.spanningtree mode PVST. convergence is ok.VTP ...
Hi,I made a vlan in my switch network. cat3550 (layer 3) is doing intervlan routing. I'm able to login to windows domain from the new separate vlan PCs. I included "ip helper-address" command on the vlan interface of my cat3550 (layer 3) switch with ...
Hi to All,I need a copy of Adaptive Security Device Manager so I can look into a 2900 series switch to check it's ports settings. Look on the cisco web site. see nowhere to get a copy. Willing to buy a license to use it also. I'm on a rollout and ru...
I am trying to lock down a particular server, so that if is compromised, it will cause little impact on the network.The server is going to have a 1 to 1 NAT on a cisco 1760 router. That nat is going to allow ports 80 and 443 from the outside into tha...
