Routers - Small Business

Hi All We got the RV132 router from Cisco, we were planing to replace our Telekom DSL router with this one, the problem is that the ADSL slot in the router is RJ11, we have a TAE-f/RJ45 DSL cable by default here in Germany. the ISP does not provide ...

i have about 8 of these RV042G routers deployed at sites that require dual-WAN capabilities in the past 6 months, 5 of 8 have randomly reset to factory defaults. These devices are on UPS' so they are protected from power issues. It's becoming a major...

I did not see any specific alerts for just the firmware. The client who has one needs to be HIPAA compliant so being able to know if there's an upgrade available would be great. I know Cisco's site has a notification option but it would be nice to kn...

Hello, I'm using a RV320, connecting to DSL using PPPoE. My provider (Telekom Germany) disconnects the connection every 24h, and that also interrupts all Site-to-Site VPN links, etc. Is there any chance to schedule a reconnect for the WAN interface...

I have an RV320 set up for a customer but I guess I got the instructions wrong for port forwarding.  What they want, and what the old router did was: External port 45069 should be mapped to Internal port 5069 for IP 192.168.0.8 External port 44222 s...

I need to translate ports in outbound direction:SRC: x.x.x.x:xx -> DST: y.y.y.y:yytoSRC: x.x.x.x:xx -> DST: y.y.y.y:zzCheck Point and iptables can do it....How do I configure it on a RV320/RV325?? Best regards   Jan

Hi all,  I configured a working GTG tunnel between RV320 - RV325 (both running v1.3.2.02). Lan clients on either side can ping lan clients at the other side.I added an Easy VPN configuration to the RV320 and connect to it. I can ping anything on the ...

Hello! Port forwarding has stopped working. In fact it hasn't been working for a long time and I've been unable to get it working despite my best efforts. I've tried using different firmwares and with factory settings to no avail. Any ideas? Here ...

Hello, We are currently setting up a newly acquired RV325 and have run into two issues: 1.  There seems to be a limit on One-to-One NAT using the GUI of 10 total.  We have 13 ext to int maps currently.  Is there a way to bypass the limit of 10?  Each...

Hi Guys I got a query I want to run past you to see if it's doable. We have a site which has 2 internet connections, one for VOIP and one for Data. They have gotten a faster service now and want to remove the VOIP internet line and use their phones ...

Hello everyone. I do small biz computer support but am not an expert on all things Cisco, so I apologize if this is a dumb question. I have a restaurant customer who has an RV 110W. The device is located in his back office, which make it difficult ...

We have a Cisco modem/router model DPC3941B provided to us by Comcast.  This modem will not give IP addresses to devices which are not running Windows (such as Ipads, Iphones, Tablets, etc); the modem recognizes the devices but will not give them IP ...

I've got a Cisco 1841 (revision 7.0) router. It shows me this message during the boot process: *Jan 14 11:17:03.739: %LICENSE-2-VLS_ERROR: 'VLSaddLicenseStorage' failed with an error - rc = 143 - 'Error[143]: Failure in accessing the specified store....

Have setup my RV320 VPN Gateway to Gateway but I cant use UNC names or browse networks. I can ping across. I think its a DNS issue but don't know how to resolve.  

Hello, Looking to find a router that could connect to a central wifi-SSID, boost the signal and also have ports with POE capability. Wondering if there are any thing ? Essentially, I have a router in the garage. So, need a gizmo that could connect t...