Routing

Hi, In my headoffice we have cisco 3845 router.in the router we put the show log command the below error is came..What is the error??why the error came??kindly anyone tell me  to resolve the solution. 25024684: Feb 29 10:33:13.759 India: %FAN-3-FAN_F...

Hi Firends,I want to kown if is posibble to configurate route map in sw-c3750x-24 or only is for router? I made this configuration:ip access-list extended TDPpermit ip host 192.168.1.79 anyip access-list extended Claropermit ip 192.168.1.0 0.0.0.255 ...

Hi AllWe have a number of 2651XM with WIC-1ADSL.  These are supplied by another company and we do not have access to the configs.We are told that the maximum throughput from the ADSL WIC to the FastEthernet 0/1 is 2.5Mbps ( "it's a backplane issue" )...

Simple question here folks,I have a SR520 router with the ADSL WAN built in.I am looking to ignore the ADSL port and utilise the 4 FA ports to route between two networks.Can I configure the ports on the switch part of the router to become Layer 3 and...

We are looking to make some graph about the SNR values of the 8xx we have in customers ofice.For the 878 router we have some problems to understand how the SNR calcul is done.878shdsl#sh controllers dsl 0 Loop Attenuation:  9.0 dB Transmit Power:  13...

Is it possibele to set up QOS based on Vlans assignments?I want to guarantee that a certain vlans traffic is always sent first before all other traffic in times of congestion.Is there a way to accomplish this?Thanks!

I have an ASA 5520 connected to a Cisco 6509E, and we're turning up EIGRP between the two. The problem that I'm running into is that there a few static routes (including a 0.0.0.0) on the core that's being redistributed into the EIGRP AS, and I need ...

Hi all,latest IOS version is from 18Nov11 and with little amount of traffic it keeps cpu usage sky-high until it starts losing packets (I've tried performance fine tuning according to cisco webpages and saw little difference)Downgrading isn't an opti...

Hello Dears,I facing issues in my network, but where the things are going wrong i can't trace out, My 6513 Cpu utilization goes high for 75% and  pings drops are seen to the server which are directly connected on the core, My PC is connected to acces...

Hi,I am running in to an issue with eBGP multipath load sharing.  I have a CE router connected to an ISP single PE router running eBGP on an MPLS network.  CE router has a 5Mb ethernet and a 1.5Mb T1 link to the ISP.  I am using the "maximum paths co...

Does anyone know of any issues with SXJ and source specific multicast? We upgraded our core from SXI6 to SXJ2 and multicast stopped working for all but our L3 links.Our L2/L3 links stopped working and the only thing that has changed is the IOS versio...