Hi Everybody,I am using Cisco 2811 Router with Version 12.4(13r)T.I deleted unwanted files in the Flash. I tried to give squeeze command. But the command is not found. It this the IOS support problem?Also i read that there are 3 class of file systems...
I am looking at setting up a new WAN connection for a client. This would involve redundant 2gb (could scale to 10GE) IpVPN connections using BGP for failover. I am assuming the the ISP will offer a 10GE links for the connection.In order to save cos...
I'm setting up my 1st Cisco router: a 2801 & 1 port VWIC2 t1 card. The t1 is also different from the rest of our point-to-point t1s. It only has channels 9-24. Checking configs I saw the channel-group command. Someone told me this is only to be u...
router# copy flash: xmodemOk guys the above command is not working at all it should have coppied the image to the etherswitch module but it just renames the file and copy it in the router flash im pasting both the outputs.It should work like that:Rou...
HelloI have a Cisco 7301 and we are trying to get BGP going using a 4 byte ASN. However the IOS that was uploaded is not liked by the router.The router keeps going into a boot loop a few times and then it goes into rommon mode. Trying confreg 0x142 o...
Is SONET a WAN technology? If not, what WANT technologies does SONET function at?
Does anyone know what this means and what is the caller 0x6051210C? Can I solve this?The router is a 7204vxr (npe300)sh memory failures alloc Caller Pool Size Alignment When0x6051210C Processor 65536 0 1w4d
can we put ACL on 2950 switch to block some IP's of some range.plz explain.
Hi, We have eBGp with our SP and they are sending default to us. When we do a show ip bgp ne X.X.X.X received-routes the O/P says % Inbound soft reconfiguration not enabled on X.X.X.X.If I do a Soft reconfiguration on the Inbound. It learns a whole l...
We classify / mark traffic inbound on LAN interface and shape / queue on outbound interface in a DMVPN / GETVPN environment. Our understanding is that with classification and marking on LAN interface, DSCP / TOS bits are preserved (copied to IP Heade...
All,I have a site that has a 20mb DS3. I want to limit them to 3mb for everything. What I have so far is this:policy-map SHAPEclass class-defaultshape average 3000000policy-map POLICEclass class-defaultpolice 3000000int s1/0service-policy output SHAP...
I am running ios 12.4(20)T and my problem is when i configured HDLC, my connectivity drops intermittently but when I use frame-relay or PPP it functions normally. Can somebody confirm this for me, has any of you encountered this problem OR running HD...
Hi All,I have a misconception in basic theory of OSPF Router ID.I know that by configuring Loopback Interface, that will become the OSPF Router ID. It will always stay up particularly during Router boots up its interface comes up before ospf starts. ...
Got the follwing error after upgrading router 837.Follwing is the complete error.partition flash 2 10 2^% Invalid input detected at '^' marker.% Crashinfo may not be recovered at flash:crashinfo% This file system device reports an error.Follwing is m...
Hi,We are trying whiteboard application that use multicast ¨Ip address 224.2.1.1¨and it not working getting an error this error on the 2950 switch :IGMPSN: router Received non igmp pak on vlanxxxany idea ?Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 12-05-2025 03:27 AM | ||
| 12-03-2025 07:46 AM | ||
| 11-13-2025 04:57 PM | ||
| 11-09-2025 09:51 PM | ||
| 11-06-2025 06:09 PM |
| User | Count |
|---|---|
| 10 | |
| 6 | |
| 5 | |
| 4 | |
| 4 |
