Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Labels

Forum Posts

HI,I have a PRI line whcih is newly configured, but the controller is going up and down. Is it because of the configuration issue or the hardware failure. The clock is set as external.

drnteam by Level 1
  • 643 Views
  • 4 replies
  • 0 Helpful votes

Hi,I want to know basic diffrence between Cisco 1600 1700 2500 2600 series router also there features.awaiting for your reply Thanks in Advance

Hi,I had recently requested an upgrade from my service provider on one of my frame-relay site. Is there a way to verify if an upgrade has been done on my pvc?Regards.

1lumkk by Level 1
  • 825 Views
  • 4 replies
  • 0 Helpful votes

Core consist of 6509 where all the access vlans has been configured. Access vlan ips - 10.0.0.0 range. server vlan 172.21.0.0 as mentioned in dia. Backbone router consist of 7200 series router where all the branch office at terminated through FR link...

Imagine I need to provide a router to connect to:Port fa0/1 (10Mbps)Port fa0/0 (100Mbs)Port e1/0 (10Mbps)in addition, I need to connect this router to a 10Mbps MPLS circuit.Which router model should I consider? I thought about the 3825, but it seems ...

news2010a by Level 3
  • 1327 Views
  • 3 replies
  • 0 Helpful votes

i would like to tune my qos that its on the ATM links,i used to strict priority policy on pvc's also adjust tx-ring limit as an 20 for 512 K links.On attachment looks like ok for audio packets.But when i fill the line with traffic,voice getting noi...

tdorduncu by Level 1
  • 836 Views
  • 5 replies
  • 0 Helpful votes

Hello All, To appease my curiosity on the use of QoS and VoIP, i would like to buy the necessary equipments for my lab experiment but i don't know what to buy.I currently have routers 2611XM with CSU/DSU, and four serial interfaces each.What...

newnetman by Level 1
  • 350 Views
  • 1 replies
  • 0 Helpful votes

Hello there, wondering if anyone can help me resolve this issue I have. I've attached a document outlining the design and some notes on the issues.Many thanks,Regards,Michael.

I have a problem that it seems that my multicast traffic is only working in one direction over the WAN.In addition to the application that we are using, i am also using a tool that generate mcast traffic. It appears that the traffic is only one direc...

Tshi M by Level 5
  • 16157 Views
  • 15 replies
  • 0 Helpful votes

I would like to configure my 3750 switch as NTP server and synchronise for few windows serverswhat all commands should i useAny help on thisrgds/shiva

shiva_ial by Level 1
  • 2116 Views
  • 16 replies
  • 0 Helpful votes

All,I had duplicate ip address issue today caused branches unable to reach the server in DC. Ip conflicte on gateway ip address of DC. Is there any method to avoid duplicate ip address???please advise.Regards,Gopal