Routing

Hi:I have and old 3548-XL, I dont known why but it became to send some messages in the log.RAM Access Frame from non-ram access portRAM Access FramertRAM Access Frame from non-ram access portRAM Access FraportRAM Access Frame from non-ram access port...

Is it possible to set up sub-interfaces (for different vlans) on an 851?

Hi Expert's!i need to understand Some Thing;waht is the difference between the Various access-list:named access-list! Remarque access-list!????10xs

Want to know whether HWIC-4T [Serial Synchronous Port] is supported in Cisco 3845V3PN Router.

Hi Sir,My customer have few C7609s running as P/PE. Each C7609 are running with two sup 720BXL. One of the C7609 Active sup (in slot 5) suddenly become Unknown and the Standby sup (in slot 6) become Active. What is the main cause of this to happen?My...

Hi,How many voice calls NM-HDV2-2T1/E1 card will support without PVDMs.What is the purpose of PVDM slots?Some one told without PVDM, NM-HDV2-2T1/E1 will support only 15 calls. Is it true?RegardsSKRAO

Hello All,We are planning to do Eigrp load balancing between three locationsPreviously we have direct connection between location1 PPP via DDN line T1 128kbps and location2We are using Cisco 1721 With Eigrp protocol redistribution of Rip V2Now we wan...

Hi,Do we option in tracert ( or any other command on cisco router or command prompt of windows machine or on any unix based machine ) which will tell us the entering interface of hop device and also the exit interface or the devce.Thanks Subodh

dear allif i am going to redistribute a routing protocol into eigrp, and i have a delay metric of 2ms how i am going to insert it in the redistribution command the dealy of the interface is a unit of 10-micros second as cisco tell, please help

Our company bought another 6509 switch and like to implement HSRP at our 2 core switches, I setup a test lab before configuring it on our real network. Please take a look at our network topology as attached: We have 2 routers which are used for WAN c...

I have three links from the same vender(vendo1) from my routerA to routerB which is configured eigrp and i have one more link which is from different vendor(vendor2) we have configured MPLS (6mb) as the backup link which has static route when all th...

if i need to buy a router and a switch. what feature should i look for in a router and switch? i mean on a hardware and a software side.