Routing

Hello. Within an EIGRP configuration, does the command "redistribute static" redistribute all static ip route statements, or just the default? For instance:router eigrp 10redistribute staticnetwork 192.168.1.0network 192.168.2.0ip route 0.0.0.0 0.0...

Hi everybody. I am working in Isp and We have own ip range (for example 10.100.50.0/16). We have Internet link with one Isp where had written our ip range and other info. Now WE got another link from diffrent Isp and we have two link but we havn't ...

Hi,We have 3745 series router on which we have chnnelised E1 controller with 30 64 kbps links leased lines . These links are up and working with HDLC encapsulation. But when we are trying to encapsulate few of links in ppp , protocol is not comig u...

I have several offices with p2p T1's that terminate in a central office. This central office has the corporations ISP and an ISA proxy server with Surf Control. For failover, I have a DSL connection that has a VPN back to the main office. The VPN ...

Hello,In which QOS class would you classify a videosurveillance application (e.g AF2 ?)

I have a 2511 and it is connected to a 3com 10baset 8 port hub and i am getting E0 input/output errors. Can I configure the speed/duplex on the router? Also, from the sh ver. output my image file is flash:igs-i-l.111-6". I can't find any documentatio...

I am having problem with our Cisco router 1841. I configured it for vpn remote client access and it works, but once connected I can't remote access the server inside the network. I can mount the root drive but can't browse the folder in the drive. I ...

I want to group two interfaces.Exact requirement is both interfaces should go down simeltaneously, if any one of of them went downbackup group of interfaces should come up after this action.can this be done by object tracking?hardware : - >cisco 6500...

OSPF md5 authentication passwords can be decrypted or can be used by copying and paste inspite using md5 algorithm which is same as enable secretIs it a bug Please explain??

Hi,We have two routerss connected by wan links and OSPF is enabled on this interfaces. On each router we have Channelised E1 controller to which 30 locations are connected. We are using static routes to in these two routers to route the data to the...

Hi, I have a 1841 router. And I have a VWIC2-1MTF-G703. The router doesn?t recognize the interface card. The IOS is: c1841-ipbase-mz.124-1c.bin. When I do a sh run, i can?t see the controller E1 neither serial 0, but when I do a sh version, I can see...

We have two vlans seperated by a router and we want to configure wake on lan.The users are located on Vlan 40 and the Wake on Lan server is located on Vlan 50. We need the Wake on LAN server on Vlan 50 to be able to power on the users terminals on V...

I need some help getting to another network that is located on the outside interace of a cisco pix 501Let me see if I can explain this the best I can.Right now my ip is 10.7.1.250 with a mask of 255.255.255.0 My default gateway is 10.7.1.1 which is a...

Hello, we are considering bonding three T1's utilizing MLPPP. No BGP or anyhting. Can anyone suggest the best product line for this? We were also considing utilizing the dual-port WIC's, anyone have any reason not to?Thanks!Blake Frericks