Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Webinar

 
Labels

Forum Posts

Hi,we've configured a 1721 router for adsl connexion, both atm and dialer interface become up but the dialer haven't got ip address.we tested the adsl card in another routeur; with same config, same account ;it works well.we've used the ios c1700-k9o...

Hi,We have 3550 switch with following IOS information.Cisco Internetwork Operating System SoftwareIOS (tm) C3550 Software (C3550-I5Q3L2-M), Version 12.1(19)EA1a, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2003 by cisco Systems, Inc.Compiled Tue 09-Dec-...

Hi,I need to check the health of my network. A tool that can give me the details of broadcast and multicast in the network, the LAN (fiber, copper) link utilization. If any host is making un-necessary broadcast i should be able to track it down from ...

rush2amol by Level 1
  • 319 Views
  • 3 replies
  • 0 Helpful votes

Hi,We hv a network as per attached topology diagram.Topology:-Public Segment via Internet Leased Line and Private segment via point to point link between Internet Router and Private RouterEnabled static NAT on Internet router for Private Segment Seve...

fmatrine by Level 1
  • 728 Views
  • 5 replies
  • 0 Helpful votes

hiI want to phase out my cat6509 (sup1/mscf1/pfc) with suitable replacement. Currently i am using msfc feature extensively for vlan routing, eigrp, staitic routing ,policy based routing and CEF features. There are about 200 ports currently in use.AS ...

egain.com by Level 1
  • 603 Views
  • 8 replies
  • 0 Helpful votes

I?m trying to redistribute BGP into EIGRP and am having some problems. I?m not seeing any of the BGP routes in EIGRP. I have attached the configurations of each router I?m working with. The one labeled ?tazwellopps2851? is the head end router. These ...

I configured the nm-card for data transmision, but it doesn?t work. it send alarm and do not enable the connections.this de configurration instructions:card type e1 1 1controller E1 1/0 framing NO-CRC4 channel-group 1 timeslots 1-16 speed 64 channel...

We currently have a 3620 routing all traffic from our internal subnet to the internet. The router Ethernet 0/0 connects to our provider’s wireless bridge at our facility. The Ethernet 0/1 connects to our firewall. This router is showing its age and i...

xetra8380 by Level 1
  • 912 Views
  • 20 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card