Routing

Dear All, I just want to know which all router support ADSL2 & ADSL2+. what is XM and XJ in ADSL Technology. Waiting for your reply.... Thanks/Regards Atul K.Dalvi

HiI have a 1841 set up with 2 WAN links. Id like to confirm that both links are actively working. What commands do I need to get familiar with to monitor this from the CLI?TIA

"When configure Frame Relay for multipoint connections, use static assignments, map DLCIs to protocol address (IP)" Why can't use dynamic inverse ARP in multipoint?

Hi All,At one of my customer we have Cisco 3700 series router with E3 card installed. Customer is having a 15Mb FR link via this E3. We have found from the router log, E3 card flaps continuously. The clock spurce on CE side is Line where as on PE sid...

I'm configuring QoS to priortize our voice traffic. This is the first time I've set up QoS so I'm a little confused.I have identified my VoIP traffic class and am tagging the packets coming into the Ethernet port with DSCP ef. My question is: Will t...

Hi Sir,Does the PA-MC-8TE1+ support unframed G.703, on a Cisco 7206VXR NPE-G1 platform?Or, do I need to get the PA-4E1G-120/PA-4E1G-75?Please advise.Thank you.B.Rgds,Lim TS

How to get CCO account, what are eligible criteria ?

Hi,yesterday I upgraded the IOS release from 12.2(12b) to 12.2(34a).the 7206VXR router maintains the same configuration of L2TP:vpdn enablevpdn multihop!vpdn-group Exxx-IPaccept-dialinprotocol l2tpvirtual-template 1lcp renegotiation alwaysno l2tp tun...

Dear Colleagues,I am stuck in trying to solve a TCAM/Netflow table utilization problem on 7606. I get sometimes (not the peak hours, it can happen when I have least traffic or pps) the following messages:MET_DST: %EARL-SP-4-NF_USAGE: Current Netflow ...

Hi,I am looking for a link shows the bandwith weight for every interface to make sure I am not exceeding backplane capacity of my 7200s.Thanks

I have recently installed a WIC1 ADSL into my cisco 2610 Router. After inserting the module into the router it is shown as unrecognised when the interfaces come on-line at boot.As shown here;Press RETURN to get started!Unknown WIC in slot(0/0), wic c...

Hi Folks,I wonder if any one knows how can I show the currently used bandwidth at my 7200VXRs backplane.Appreciate your input.

HII want to know about VPN's becuse i am want to learn about it.Introduction to VPN ??Cisco Plateform minimum (router and IOS) on which they are supported.please foeward me some usefull link about the VPNsThnaks

We are prepping to move a datacenter. The concept is to move our servers by subnets, ie at the old data center shut down the interface vlan (for example) 10.10.200.1/24 and at the new data center bring up the interface vlan 10.10.200.1/24 and let OS...

Hi,Hope you can help.On a router, when setting the bandwidth parameters for either a Policer, Priority or Bandwidth command should you include the layer 2 overhead?Cheers,Phil