hi i have got a 1841 isr router having SDM.i am having a strange problem, whenever i configure an accesslist on any interface it starts blocking my telnet connection from outside. i tried to apply an acl having permit ip any any on my outside interf...
Hello,I'm currently having BGP running with 2 ISPs on 2 routers at 2 data centers as a failover setup with AS Prepending applied on a /24 advertisement on the router at the second data center. I have a 1Mb connection going to this data center throug...
I am trying to get a new configuration to work that involves a 2811 router and a 2651 router running 12.3 code. In the 2651 router I have a 2 port T-1 VWIC and I have successfully connected to the 2811 router with a CSU DSU T-1 WIC and pass data fine...
We have a vpn between a branch and central office, We want to control the internet access from the branch office so basically any users in the branch office who wants to access a website will have to come over the vpn to the central office and break ...
Hi all,May I know whether two-factor authentication can use on RAS router?SetupRAS router(3800 with NM-24DM)--->ACS server--->2-factor auth(RSA)Thanksmak
I have a 2811 in a remote office that has a T-1 as the primary circuit and DSL as the backup (WIC1-ADSL card) that has a VPN tunnel back to our NOC. The config works fine if the T-1 goes down and stays down, but if the T-1 bounces and comes back up i...
Hi All,How does authentication of vpn users work on the asa? I know it can have a local database, but what about external databases? I guess I am wondering if I can have my asa communicate with my windows AD environment for username and passwords. ...
Hello,I am having problem with T1 circuit. Cisco2621XM IOS 12.3-9a is connected to the carrier by T1 now without any problems. And last week I tried to swith over to new T1 carrier using same Router/version/WIC card, but different carrier. Since int...
Hi,I?ve configured vtp pruning but I am still getting broadcast traffic from vlan 6. I just used the vtp pruning command. Do I have to configure anything else to enable pruning?Thanks
I am trying to establish connectivity between 2 2611XMs using standard WIC DSU T1 V2 serial interfaces between the US and the UK. Line provider tells me the line is good all the way through, but I cannot connect. British Telecom states I might need t...
Hi,I'm changing my internet gateway router from cisco 2600 to Cisco 2811 router but I have problems access the https servers on the DMZ of my PIX firewall which is behind the internet gateway router. What could be responsible?.
