Hi. I have a C8500-12X. But I cannot see the HSEC License. I know that It is default in all C8500 Platform. What should I check ? Should I try to factory reset ? Thank you.
Forum Posts
Hello, has anyone encountered this problem? I installed Root CA on vManage 20.9.5.2 and tested it by creating it from vManage, openssl and xca and got the same error. openssl req -x509 -new -nodes -key ROOTCA.key -sha256 -days 730 \> -subj "/C=US/S...
Hi, I have noticed that there is no Tunnel option when there is a SVI interface in VPN0. Is SDWAN Tunnel not possible over SVI ? Is there a workaround around this limit ? Did anybody find where is this limitation stated in any Cisco SDWAN documentati...
vmanage# request nms all statusNMS application serverEnabled: trueStatus: not runningNMS configuration databaseEnabled: trueStatus: not runningNMS coordination serverEnabled: trueStatus: not runningNMS messaging serverEnabled: trueStatus: not running...
I am planning to migrate my SD-WAN from vEdge platform to cEdge platform...I found following link showing steps on migration but it is targeting the physical appliances... https://community.cisco.com/t5/networking-knowledge-base/migration-sd-wan-vedg...
We have been running DMVPN across all our branches and Headquarters. There are three hub locations under two different WAN connections, and each spoke is connected to those three hubs via NHS clusters. Now, two hub locations also have Site-2-Site VPN...
I am getting this error when trying to push the template. Checking TLOCswan intf GigabitEthernet0/0/1 FAILNo TLOCs available through which control connections can be established!Mandatory configs missing
Hello, I want to integrate Cisco SDWAN Manager (vManage) on version 20.12.4 with Cisco DUO for MFA. I do not find vManage as protected application on DUO portal. Regards, Lalit Agrawal
Hello, I have a customer with on prem controllers. Controllers are using private IP addresses, and they are NATed to public. They had MPLS as one of the WAN connections but now they moved to Internet as both WAN connections. I want to have controlle...
We deployed Cloud OnRamp for Multicloud for Azure. Tested the work - everything is ok. BUT we have found that SD-WAN Manager created BGP sessions with Azure, needed static routes, VRFs, and other important configuration elements in the step when you ...
Hola a todos, estoy buscando entender mejor cómo funciona la opción de Enhance ECMP Keying en una configuración de Cisco Catalyst SD-WAN (anteriormente Viptela SD-WAN) cuando tengo 2 enlaces MPLS con diferentes velocidades. por ejemplo, el enlace pri...
Hi Cisco Community, We’ve set up VRRP on the LAN side successfully, but we’re facing issues with the WAN side while using Cisco vManage SD-WAN. The failover isn't working as expected from the WAN side, and we’re not sure what could be causing this is...
Hi,I have at my lab vEdge running version 20.9.3.1 with 2 WANs.from both I'm getting over BGP default route -vEdge3# show bgp routes 150.1.1.0/24bgp routes-table vpn 0 150.1.1.0/24info 0nexthop 150.33.0.2weight 0origin incompleteas-path "200 200"path...
Hello, I am looking to understand what IQDF relies on in the Datasheet performance/scalability numbers for the Catalyst C8300 and other routers. The results I am interested are for the IQDF Mix, "** IQDF traffic pattern: IPSec + Quality of Service ...
Hi there,I'm running on LAB (in order to learn and practice) SD-WAN Scenario vManage/vSmart/vBond running version 20.9.3.1running as cEdge - Catalyst 8000v running version 17.11.1aI've successfuly added the Edge devices to the vManage yet - when I tr...
