Hi. I am new to SDWAN and am trying a basic lab. I have attached my lab topology. I implemented this on eve-ng using vmware workstation player 17.. After installation and basic IP configuration on vmanager and winserver I can ping vmanage IP (192.168...
Hi, I am new to Cisco SD-Wan obviously and would like to know if it can replace a common wan topology solution for a site requiring dual ISPs either failover or load-balanced with a public ip range independent of the ISP routing to those addresses as...
Im working on understanding the configuration group and feature profile functionality in the newer versions of vManage. I have created a configuration group with the necessary feature profiles to replicate my current device and feature templates. How...
Hi all,I want my CML sdwan vEdge routers to use sub-interfaces to increase the number of available WAN interfaces (which need to be configured in a VPN other than zero).Hence you can't configure transport tunnels. So, what is the use of them?
We have an issue in our environment where branch locations in our SD-WAN topology will have partial connectivity after state changes in our network. For example, we recently had to failover to a secondary firewall and a large # of branches lost commu...
Going to be starting an IOS XE SDWAN deployment where the primary WAN connection is cablemodem and secondary is cell for remote sites. With old school routing, we would use EEM to detect when the primary connection was down and admin up the cellular...
HI We like to setup SDW with viptela. we know viptela is setup at edge of branch office network. For vbond, vsmart and vmanager, where can we setup them? In data center? cloud or vendor? Anyone can share experience? Thank you
HiIs there any mechanism by which we can take the backup of all the configurations from vManage such as a centralized backup which can be used in case of any restoration during any trouble or issue.
Hi all. I am trying to find out if there is a way to monitor detailed template changes that has been done for the last 6 months (I use vManage version 20.6.3). I am aware that there is some information on vManage GUI section MONITOR - AUDIT LOG, but ...
I am studying for Cisco SD-WAN exam and sometimes arise some questions that doesn't make sense for me. Take a look at the attached to see the specific question that I need help to get a better explanation.The color is clear for me, but in this contex...
Hello,I am having difficulties completing my TLOC-extension setup on my two IOS-XE devices in a lab. My control connections are up, but my bfd sessions are not coming up. My two routers are connecting to the ISP over the internet links, one on each r...
If you have 10 sites. 5 of them use DHCP address to get internet connectivity. 5 of them use static interface address. Would it be possible to have one template and have all 10 devices a member of that template with the configuration differences?
After changing configuration in Localized Policy -> Data Prefix List I get error.I change my acl, put new value - 192.168.10.5/32 (or other ip) and get error like that - 22-Jan-2023 13:54:18 MSK] Device: Data provider returned CONFD_ERRCODE_INCONSIST...
As I am going to work on the vManage SSO with Azure AD. I am unable to download the SAML metadata in vManage.As the process i need to download the SAML metadata in txt and upload in Azure to get the federationmetada.xmlRegardsInderdeep Singhwww.thene...
We've been looking for a way to sort of replicate the output of our IWAN monitoring of traffic classes to check which transport is currently being used and when previous switchovers between transports occurred and why. For example, in IWAN if you wa...
