Hellofor Tests I need iSCSI Driver Version 3.4.5 for IBM AIX 5.1 aund HPUX 11.1 which are out off support and not avaiable on Cisco Side anymoreCan you help meBest RegardsReinhold Flecke
Hi,I'm searching for a way to know online (or historical) if I have an issue because port oversubscription.Can I see the current (or historical) port group entiere bandwith?Or maybe I should manual calculate each of the shared port utilization?Thanks...
Hi we have purchased 2 9506 Directors whic we want to dd to ir existing fabric which consists of 2 MDS 9222i switches. As the new switches are running 5.0.1 code and the MDS 4.1 (3a) I presume that I will need to upgrade the existing switches as well...
Greetings all,If I wanted to rename our active zonset called abc vsan 21 to xyz vsan 21 on our 9500 series mds. Doing this, should not cause an issue or knock anything offline?A collegue of mine was telling me that it may knock its zones and members ...
I want to use "cli var" command to setup a variable for the sh clock command, "cli var name time sh clock". So I can run a script and use the variable to add the output of sh clock to "copy run tftp://10.*.*.*/Switch1A-$ time" so the sh clock would g...
Hello All,Apologies for what must be a basic question but I'm struggling to find a reference for this, is it feasible to establish two FCIP links between the same pair of MDS without a portchannel with all the Ethernet links from both MDS in the same...
Hi all,I have been reading the following documentation:Cisco MDS 9000 Family CLI Configuration Guide, Release 4.xMy question is more to do with CLI commands, so if I have posted to the wrong forum let me know where I should have posted my question an...
Hi AllWe have an snmp config for all our switches but the SAN Nexos doesnt take the commands -However just putting in the SNMP users seems to work -Here is the config we want to put in -snmp-server group netops v3 auth read read-viewsnmp-server view ...
I am not NX-OS guy... but and I am trying to configure authentication with our ACS on our MDS 9222i. I want to use tacacs+ then local if that fails.In IOS I can do that with the following command:aaa authentication login default group tacacs+ localBu...
Hello there,I have two Cisco MDS 9148 and I am managing them with Fabric Manager. These switches are not connected to each other.PROBLEM: When I open one of the fabric, Map on the fabric manager is showing two switches, and I noticed that VSAN WWN of...
Greetings, Iam a newbie to the san switch world. We have a MDS 9500 san switch and I am configuring and have questions about aliases. I see our older Cisco san switch uses device-alias, but the new one uses fcalias. Both commands seem to work on the...
I have an MDS9124 that I cannot copy a license file to because it returns "Read-Only Filesystem". I have been recommended to format bootflash. I need to know if that action will take the switch offline or reboot it so I can request an outage if nec...
Dear Experts, Following are the questions: 1- Can Nexus do FCoIP? Please explain and give some example 2- Can we easily connect traditional FC to Nexus directly on the existing Main Site and forward traffic through FCIP? 3- Will this solution work p...
AIX tries to startup FCoE before LACP is negotiated. We added a startup script to run cfgmgr on the VIOS after LACP starts up to get around this issue.Sent from Cisco Technical Support iPhone App
HiWe are looking at re-configuring our SAN and the question came up as to whetherthe Interswitch link could handle the additional throughput.My fellow engineer was convinced that the fibre channel links (being fibre) could approach100% without failin...
