Switches - Small Business - Page 347

Looking for support docs and videos? Check here

We recently announced the release of our self-serve virtual assistant. You can read the full announcement here. Videos and documents are available within a click for our latest products. Once you've told the bot what device you're using, the context ...

Helpful support links - Updated September 2023 w/ Catalyst 1200 - 1300

(Updated September 2023 - Added Catalyst 1200 and Catalyst 1300 ) Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Catalyst 1200 & 1300 Hardware Install...

SG 300-28P How to Default a port Config

Hello,I'm used to using full blown cisco IOS/CLi and I'm new to the SG 300 switches.Can someone please tell me how you can default a port config?The 'default int ##' command doesn't exist on the CLi and I can't find anywhere in the web gui for this.F...

Setting Auto baud for SG-500-28

Hi,I will like to set auto baud for the SG500. By default its 115200bps.I had tried the following methods:1) switch xxxxx (config)# line console switch xxxxx (config-line)# autobaud --------------------> my terminal hangs and print out rubbish2) ...

Sx300 Firmware Version 1.1.2.0 problems

Hi Cisco support,I have 10 pcs of Cisco SF300-24P but i have strange problem im not sure if this bug or not. i completely update the firmware from Version 1.0.0.27 to 1.1.2.0 i found too annoying thing you cannot assign VLAN ID in interface managemen...

Resolved! Adapting Fiber SC Connector to SRW2048 Switch

Trying to replace 3Com Superstack II Switches (3C16980) with 100Base-FX Modules (3C16970) with a Cisco solution. Existing Fiber connector in Network closet on both ends is an SC connector (picture attached). What Modules, adapter c...

Resolved! POE Switch

Is the SF100D-08P unmanaged POE switch a discontinued model? If so, is there a comparable replacement? I'm looking for a reasonably priced switch to power WAP access points.Sent from Cisco Technical Support iPad App

I can not access the switch through the console (solved)

Hello,I'm having a problem.I can not access the switch through the console. The web interface is working properly.Model: SRW224g4Below some pictures.The HyperTerminal settingserror:If anyone can help me?Thank you and excuse the bad English.

Resolved! SG300 switches have poor performance in Layer 3??

We have several of the SG300 Serices switches. We use them to route VLAN traffic to Remote Offices, Internet Connections, and WiFi Access Points. In one remote office we have a SG300-10 setup to route the HQ Network and the remote Office Subnet. The ...

Connecting SG500x-24 to a MOE

I need a little guidance. Trying to connect SG500X-24 switches to a new installation of MOE (four sites)provided by Century Link. Anyone have any experience with this? I have tagged the uplink port with the MOE vlan, but traffic ...

Resolved! Create 2 VLAN (VLAN 1 & VLAN 2)

Hello all,i need help and advice with my new Cisco SF300-48. I want to create 2 vlan (vlan 1 & vlan 2). The switch is set at layer 2.example :vlan 1 (port 1, 2, 3) , vlan 2 (port 4, 5, 6)vlan 1 can communicate each other (port 1, 2, 3) and vlan 2 can...

Power adaptor of the sf302-08p

Hey,We are looking for a power adaptor for a cisco switch Sf302-08p. We can't find the adaptor anymore and we have to orde a new one, but we can't figure out the order number of the adaptor. The voltages is 48vdc and has an 4 pin connector . Do someo...

Compatibility question with Nortel phones

Hello,I just introduced a Cisco SP200-48P switch into our Nortel environment. When I plug the phone into a POE port, the port is unresponsive (doesn't light up), and the Nortel phone doesn't power up.The data aspect of the port is fine, when I plug a...

Resolved! SGE2000p QoS for VoIP

I am trying to get QoS for my VoIP system setup on several SGE2000p switches and have got a question...How do I define the ACL for RTP? As far as I can tell it will not let me enter a UDP port range for the RTP traffic... And I cant imagine creating ...

best propose ... urgent.....

Please send me the best propose for the following specification :Switch will be used for CCTV system for up to 20 Cameras.•1) 10/100 BaseT Fast Ethernet Ports ( at least 14 ports )•2) 10 /100/1000 BaseT Gigabit Ethernet Ports ( at least 12 ...

Resolved! DHCP to Multiple VLANS via SG200-50P

Here's my scenario. A client of mine is an executive office suite. Each office gets its own internet via a separate router. This is a big jumble of cabling and confusion. I want to streamline this by using a single router that feeds a single DHCP...

cisco SF 300 works as a DHCP server

hi all,Can anybody let me know any plan from Cisco to make 300 series switch to work as a DHCP server?Regards,Thanh

Switches - Small Business

Forum Posts

Looking for support docs and videos? Check here

Helpful support links - Updated September 2023 w/ Catalyst 1200 - 1300

SG 300-28P How to Default a port Config

Setting Auto baud for SG-500-28

Sx300 Firmware Version 1.1.2.0 problems

Resolved! Adapting Fiber SC Connector to SRW2048 Switch

Resolved! POE Switch

I can not access the switch through the console (solved)

Resolved! SG300 switches have poor performance in Layer 3??

Connecting SG500x-24 to a MOE

Resolved! Create 2 VLAN (VLAN 1 & VLAN 2)

Power adaptor of the sf302-08p

Compatibility question with Nortel phones

Resolved! SGE2000p QoS for VoIP

best propose ... urgent.....

Resolved! DHCP to Multiple VLANS via SG200-50P

cisco SF 300 works as a DHCP server

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

A new chapter of the Spotlight Award begins!

Join us in Celebrating the New Year and the Nov.-Jan. Winners!

Announcing Resources That Guide You to Success

Cisco Business Product Family

Cisco Switching Product Family

Redundant Connectivity Design

Does the cbs 350 support the archive command

Difficult to find MIB CPU utilisation Switch - model CBS250-8T-D

CBS350 renew wildcard SSL certificate

sg500 DHCP pool limit