Switches - Small Business

At the moment i have 2 internetconnentions with 2 different modems/routers. The computers are currently direct connected to the router.I'm considering adding a switch in the network and i hope i can make 2 different vlans each for one internet connec...

HiI want to configure VLAN on my SG-200-26P switchAP->Switch->RouterAP:VLAN's: 11,12,13Switch:Ports 13-18 connected to AP's, port 25 connected to routerRouter:on phisical intrface configured vilans:11,12,13on router I getting untagged frames, why?all...

First of all, is there a document on the SG300 that explains everything in plain english?Here is what I am trying to do...I have a Charter Communications connection to the internet through their modem.This modem has a static IP.I would like to make t...

We have 3 WiFi links between 2 buildings, these links carry a main data network, a VOIP network and a CCTV network. Occasionally due to unestablished factors we loose one or other of the links for a short period (5mins to an hour). In order to give s...

I have an srw224 that when it is powered up the only thing that happens is all the LED's continuously blink. Does anyone know what the isuue might be?

Currently I have my SG300 connected to a Wireless Router which is, in turn, connected to a Cable Modem.I'm considering adding a second cable modem. Can the SG300 handle that?

Hello, we are looking to use the new firmware's DHCP server feature to setup different DHCP scopes for 5 different VLANs configued on the switch.  I see where to turn this on and setup the scope however I can't clearly see where I can assign the spec...

I was wondering if someone can guide me.I have a SG300-10 with a bunch of VLANS created. Some ports are access ports but most are configured as trunk ports. From port 10 (trunk port), I have my ethernet cable connecting to my current router (Linksys ...

Hi,I'm the administrator of a system composed of seven SGE2010P switches in stack configuration.I developed a script to update the ACL at regular time intervals. ACLs work well unless one or more switches in the stack is turned off. In this case it w...

Does anyone have the engineering drawings for this unit andwhat is required to open the case...we need to mount this and want to see how it'sdesinged to avoid heat issues?

Hello,I am facing an issue to setup what I initially called simple network but still unable to put it together.On SG300-20 I want to setup 43 of the vlan are to separate users in to different groups and to secure data confidentiality.1 is for the NAS...

Dear All,     I used two sf-300 switch and create 4 vlans and intervlan routing is working fine.Port 1 - 10                   -------------> Vlan 1Port 2 -20                   ----------------> Vlan 2Port 3 - 30                 ------------------> Vl...

I'm getting the following in the Flash Memory error logs. Also, the switch will lose its IP and HTTP/HTTPS management ability after the switch has been on a while. I've changed the date, but it never seems to save it, so ignore the date stamp.The run...