Switches - Small Business

I have a SRW224G4 that keeps rebooting. I connect via terminal and this is what I see:------ Performing the Power-On Self Test (POST) ------UART Channel Loopback Test........................PASSTesting the System SDRAM..........................PASSBo...

Hello all,I try to configure a DHCP relay with a Cisco SF 302-08P. I configure correctly the différente option ( Server DHCP, VLAN, Gateway ...). When a pc send a dhcp request, the request arrive on the server. And the server send the reponse to the ...

We're setting up a multicast video network using a series of SG300 switches using 1.2.7.76.  We're currently testing two SG300-10s, but are finding that the switch with the cameras connected to it are broadcasting the multicast traffic to all ports. ...

I am somewhat new to this level of networking and have run into a problem that I cannot seem to overcome...I have an SG 300 switch that I had configured, and had working just fine, at my old residence using a DSL line. Since moving, I have changed ov...

Hi everyone, my switch cisco small business SG200-26G  in modality link aggregation LACP the Wake On Line doesn't work !! (WOL work only in link aggregation non LACP..) I already upgrade the latest firmware but not resolved.. Do you know how to point...

My customer has a intermittent connection loss issue with SLM224G2.In the network, there're NMS system(VLAN10) and users(VLAN20).After IP MGMT SYSTEM(Netclient) is attached, ICMP from NMS system to mgmt IP of SLM224G2 sometimes failed.But the users c...

Hi,I have to configure multiple vlans served with a unique DCHP server . As first step, I just will The DHCP server to serve 2 vlans. The following is the hardware and configuration that I implemented :Router (RV016 10/100 16-Port VPN Router) as gate...

Hello,We have a Cisco SF 300-08 here at work that cannot be used. The system lights are green and flashing. I looked into the manual and pressed the reset button for more than 10 seconds for a factory reset. The port lights lit up momentarily and the...

Hello All,I saw a post in routerdiscussions.com that was close to what I need to do.  But this site seems a better placeto ask a question.We need to install a second switch (SF300-24P) to an existing network with an SF300 48P and an ASA5500 for gatew...

Hello:its been a while, previously I got some great help here with setting up a bunch of SF302-8P switches for use with Avaya phones in this thread.https://supportforums.cisco.com/message/3585473#3585473One of the things we found with the SF302-8P sw...