Switches - Small Business

HiWith SRW224G4P Switch, to be able to restrict management access to it to only LAN and 1 Public IP address range??I have done the attached image. however it is still accesible via any other Public IP address..any ideas?

Hi, we have a problem with one of our SGE2000 switches, we use serveral ones in diverent parts of the office, but one is causing a great problem. It is running for some time (days) then suddenly, all ports beginn to blink (even unused) and all networ...

Hey i have this issu with a Cisco AP1131 it keeps saying:Due to insufficient inline power. Upgrade inline power source or install power injector.I have 4 Accesspoint on the switch and thats all.

We recently purchased and installed the SLM2024 managed switch, however are having difficulty finding out where to configure prioritizing for voice traffic.  We have an internal VOIP phone system and want that traffic to have priority over data traff...

I choose to buy a SRW224G4P with this documentation:http://www.cisco.com/en/US/docs/switches/lan/csbms/srw248g4p/administration/guide/SRW224G4P-248G4P_User_Guide.pdfOn this documentation, the switch is able to use IGMP v3 and IGMP querier:p99:  IGMP ...

Dear Support Team,One of our partners encountered problems with multicasts running on SPS series switches(they’ve checked it on 3 different models, mentioned in subject). Partner wants to use SPS series switches with IPTV, unfortunately they observe ...

Would like to know what the power per port is as we are running into situation were we are powering Mircrotik Crossroads AP .We require the SRWxxx to power 12 of these AP units and on inspection we see that we can only power 8 of them at a time . The...

Is it really dangerous to disconnect the internal fan ?The noise level is very too high for a personnal home use.

It will power my Avaya IP phones just fine.