Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

Resolved! logging facility

Dears, i have command line vty 0 4 login local line vty 5 15 login local How many users can get access to the switch at a same time   Line con 0 transport input telnet what does telnet make sense on the console port.   what is the difference between ...

adamgibs7 by Level 6
  • 1493 Views
  • 5 replies
  • 0 Helpful votes

Resolved! IPV4 address

Which RFC was created to alleviate the depletion of IPv4 public addresses?A. RFC 4193B. RFC 1519C. RFC 1518D. RFC 1918   what is the answer ? 

jonk34567 by Level 4
  • 436 Views
  • 3 replies
  • 0 Helpful votes

Which three statements about DWDM are true? (Choose three)A. It allows a single strand of fiber to support bidirectional communicationsB. It is used for long-distance and submarine cable systemsC. It can multiplex up to 256 channels on a single fiber...

jonk34567 by Level 4
  • 1666 Views
  • 0 replies
  • 0 Helpful votes

I am a CCNA student. I created one simple topology with three routes , each router have 2 loopback interfaces represent the different networks. Router 0 have Area Backbone 0 , Router 1 have Area 1 and Router 2 have area 2.   Problem is When i changed...

SDN

Which component of the Cisco SDN solution serves as the centralized management system?A. Cisco OpenDaylightB. Cisco ACIC. Cisco APICD. Cisco IWAN may i know what is the answer ? B or C 

jonk34567 by Level 4
  • 1252 Views
  • 3 replies
  • 0 Helpful votes

Resolved! Improving Design

Currently I have 2 6509's connected via L3 HSRP and L2 port channel, that are being used as a core/distribution/access switch.  I also have 6509's being used as L2 access switches and each connected back to the cores.  The concern that I have is for ...

emcclend by Level 1
  • 841 Views
  • 4 replies
  • 0 Helpful votes

Two statements about syslog logging? ( choose 2 )   A. Syslog logging is disabled by default B. Messages are stored in the internal memory of device C. Messages can be erased when device reboots D. Messages are stored external to the device

jonk34567 by Level 4
  • 272 Views
  • 1 replies
  • 0 Helpful votes

if i set the value of configuration register to       0x2102----load ios from flash      0x2100----load ios from Rom     0x2142-----?    may i know what will happen if configuration register is set to 0x2142 

jonk34567 by Level 4
  • 386 Views
  • 2 replies
  • 0 Helpful votes

hi there, hope u all are doing good have a query about ACL extended i m getting zero response of applying ACL in my network kindly correct my steps if there is any mistake happened i have settled different network with sub-netting   this is my runnin...

Hi, i am new with cisco and i bump into the same problem for the second time now. i have 2 switches each has a vlan with two pc's i enabled trunk ports and inter vlans in the router and it works fine in the first 2 switches but in the third for some ...

subneting.jpg
bearjew91 by Level 1
  • 1519 Views
  • 4 replies
  • 0 Helpful votes

Hi,    Our switch is at 93% memory utilisation and CPU has regularly gone above 80%. it is preventing me from using remote logon to the switch.   I am getting this error message on my 3750X: %Error on initialize VLAN database 1: VTP feature not yet i...

PC1-192.168.10.2 PC2- 192.168.10.3 under Vlan 10   PC3-192.168.20.3 PC4. 192.168.20.4 under Vlan 20   Router default gateway 192.168.10.1. for vlan 10 192.168.20.1 for vlan 20   I can ping 1 and 2 and 2 and 4 in the same Vlan but I cant ping across f...

WIZARD1325 by Level 1
  • 1295 Views
  • 16 replies
  • 0 Helpful votes