Switching

Ok I am wondering if the WS-3560X firmware will work on a WS-3560G-24TS switch? I know the 3560G has been EOL, but we still have a few and can't replace them for another year. I am trying to harden them a little more, but some of the commands are not...

Hello, We need to configure ERSPAN on cisco 3850 and 3650 Switches The source ERSPAN will be C3850: with the below configurationmonitor session 11 type erspan-sourcesource vlan 2140 - 2141destinationerspan-id 100mtu 1500ip address 10.137.200.1    "C3...

I recently upgraded ios on a new Nexus N5K-C5596UP . Photo of Image attached.However it comes starts in a boot mode showing something like this: Switch (boot)# and it will not let me start configurations.Please help on how I can get it out of mode? s...

Hi, I have a large existing PIM domain. This is based on PIM Sparse-mode, with several appropriately scoped PIM RP's, using BSR - lets call this "Domain 1). Another part of the network (previously under different admin) also configured PIM Sparse-Mod...

Hello everyone  i need to monitor something like 200 cisco switches (some 2960-x) and i want to know what SNMP solution would you use ?  i think of Cacti or Zabbix what do you think about it ?  thanks in advance

Can anyone help please? I have an issue with running an ERSPAN on a Nexus C93108-TC-EX switch running nxos 9.3.12 Is it possible to have an ERSPAN session that will handle packets larger that 1500 MTU? The interfaces that I am spanning and sending tr...

Hi,My team is going to be taking switch stacks and condensing them because we have a lot of unnecessary extra switches being used. I was wondering what the devices will do/ what this reconfiguration is going to look like. What kind of changes do we n...

I have a Cisco 9300 with a Cisco IP Phone 7841 connected to it, when I perform a shut/no shut i've noticed the line protocol 5 and link state 3 will flap up/down and after 4 times.   Is there a reason why cisco phones do this? or a method to find out...

Hi All, I'd configured logging in Cisco Nexus Switches. It was previously showing logs & all of sudden, I'm not able to see any logs in it. Device: Nexus 93180YC Regards, Vikram Murudkar.

I've been using many Catalyst WSC2960-24-TCS switches with GLC-GE-100FX SFP modules in our company automation networks for several years with no issues. recently I've had to replace an SFP and install several new switches with SFP's, and on each occa...

Hello everyonei have a problem with GLC-GE-100FXI need to install 24 GLC-GE-100FX 1.0 V03 in a 3850-24S-S.The first 12 are recognized while the other 12 are unknown. I try to install 24 spf 1.0 V02 and I am acknowledged all of them.I try to update th...