Switching

I have a RMA 4507+ SUP7LE that I need to reprovision the ipbase license for the replacement chassis.  I looked at the deployment guide for upgrade http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/white_paper_c11...

where to find EOL, EOS for for following hardware? I couldn't find it. IE-3000-8TCIE-3000-8TC-EIE-3010-24TCIE-4000-8GT8GP4G-EWS-C3750X-24WS-C3750X-24T-SWS-C4507R+EWS-C6509-EWS-C6513-EVS-SUP2T-10GWS-X45-SUP7-E WS-X45-SUP8-EWS-X4640-CSFP-EWS-X4648-RJ4...

Hi! on IOS 15.5.3M2 You cannot set mtu-size directly on the L2 interfaces. Its however possible on VLAN level. Is this a bug or a change in configuring the CPE?

Dear members, when there was trap for fan fail i logged in the SW and checked the power module status HSBU_1A1#show powerPower Fan InlineSupply Model No Type Status Sensor Status------ ---------------- --------- ----------- ------- -------PS1 PWR-C49...

i am new to networking.In case of switch ports Are they automatically Up or we need to make them Up via a command ?

I have DMVPN spoke side, tuunel key 234 DMVPN hub side tunnel key 123 I change tunnel key in spoke side to be same as hub side, I shut down and then no shut for both tunnel0 interface at spoke and hub, but it still not worjing sh dmvpn is in state I...

Hello everybody, I contact you concerning a LAN problem and more precisly it seems to be a VRF issue. It concerns a new implementation with a VSS (2x4506-E) connected to different access switches (3560). The new architecture contains 2 differents VRF...

Hello, can someone give me information if cvr-x2-sfp10g  is supported on RSP720-3CXL-10GE. And also SFP-10G-BXD-I module supported with onex module.

Hi,I notice some of the IOS using c7200p-advipservicesk9-mz.124-24.T3.bin and c7200-advipservicesk9-mz.124-24.T3.bin,We are running cisco 7206 VXR Router with NPE-G2. what is the benefit of using c7200p instead only c7200?

Need to understand the variations of 9k code: n9000-dk9.7.0.3.I2.2b.bin vs. nxos.7.0.3.I2.2d.bin

Hi, I'm trying to build a configuration for a Cisco Catalyst 4506-E with Supervisor Engine 7-E. I would ask how licensing works. I can choose between various Universal Image (for example: S45EU-S7-38E); I cannot find this code in any Cisco document. ...

Hi, I have noticed that our cpu jumped from 10% to 30% instanlty and 2 days ago from 30% to 50%Below the output:Core 0: CPU utilization for five seconds: 77%; one minute: 83%;  five minutes: 83%Core 1: CPU utilization for five seconds: 20%; one minut...

These cards are supported in the 6500E chassis.  Are they supported in the 7600 series? Leon