Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

I have 3 sg300-52 cisco smb switches and I am not able to get radius working for authentication. These are the information I have:#show versionSW version    1.2.7.76 ( date  19-Jul-2012 time  17:54:43 )Boot version    1.1.0.6 ( date  11-May-2011 time...

Hey there,I have an Cisco 3550 48 SMI running IOS (tm) C3550 Software (C3550-I9Q3L2-M), Version 12.1(13)EA1a. Software advisor says that I can only update to Version 12.1(22). The software download area tells me that the latest version is 12.2(44).Do...

Hi All,I want to track a route  whether it is reachable by specific IP or not, is it possible?----------------------------------------------------------------------------------------------------track 1 ip route 0.0.0.0 0.0.0.0 10.3.12.26 reachbiltyR1...

Hi,is it possible to run a Catalyst 4500 as pure Layer 2 Switch, i.e. disabling "ip routing", but still managing the switch via Fa1, i.e. the defautl mgmtVrf vrf ?I tried the following:!no ip routing!interface FastEthernet1 ip vrf forwarding mgmtVrf ...

Hi all,I have a subinterface configured for a secured VLAN. To secure the VLAN I implemented ACLs in both directions. To allow return traffic from TCP sessions I ended both ACLs with 'permit tcp any any established'.However, by having tcp established...

An interface on 2921 router is not coming up. When I shut/no shut the interface, I see this:Router#sh log | i 0/2Oct 17 08:55:06: %IP_VFR-7-FEATURE_DISABLE_IN: VFR(in) is manually disabled through CLI; VFR support for features that have internally en...

          Needing to upgrade IOS on 2800 router from c2800nm-advipservicesk9-mz.123-14.T7.bin toc2800nm-advipservicesk9-mz.124-15.T13.bin.  I noticed ther are several other files on the old code that may needed for booting up router but Im running lo...

IVAN HARO by Level 1
  • 2540 Views
  • 5 replies
  • 0 Helpful votes

Hi all,I got a Cisco 2960-S LAN (support PoE+) switch installed in one of my customers' office. The customer needs to plug some cameras to the switch and need inline power from the swtich. Two of the cameras requires 24W power in order to work correc...

huangyu731 by Level 1
  • 20231 Views
  • 1 replies
  • 0 Helpful votes

I feel goofy for asking this question, but...  there's only one version of the WS-C3560-8PC-S (and all other fixed-config Catalyst switches) no matter what region of the world they're deployed in, right?  The only difference region to region is the C...

I have a CISCO2921. I am not able to bring up its gi0/1 interface. It stays down down.From http://www.cisco.com/en/US/docs/routers/access/1900/software/configuration/guide/backup.html#wpxref16106, it looks like its gi0/1 interface is different from i...

I have 6513 - s72033_rp-ENTSERVICESK9_WAN-M), Version 12.2(18)SXF17a            .I want to do failover to the backup ISP with the "rtr" command (btw - ip sla command isnot available).I can configure rtr 2type echo protocol ipIcmpEcho 4.2.2.2rtr sched...

aparikh by Level 1
  • 3440 Views
  • 3 replies
  • 0 Helpful votes

Resolved! Nexus Default VPC

Hi Netpro,I'm pretty new to Nexus and have been putting in quoite a large deployment. One thing that happened has made me question if this is the default Nexus behavior. We have 2x7k's, multiple 5K's and loads of 2K's. What I see is the following:We ...

Hello again,This is a continuation of my last post in which I need to apply ACLs to the physical ports within Etherchannels. The switch is a Catalyst 2970 running IOS 12.2. These Etherchannels are configured as trunks with 2 VLANS allowed on each tru...

Hi All,We have a stack of 4 Cisco WS-3750G-24TS with Sw  Version 12.2(52) SE and giving weird errors:--Traceback= 17211C8 16FA4C0 16FA4FC 18625E4 18608D4 286A850 283E6FC 282EDF4 2859BBC 1B2EDA8 1B25878 Oct 17 22:26:48 AEDT: %SNMP-3-CPUHOG: Processing...

priteshth by Level 1
  • 2280 Views
  • 1 replies
  • 0 Helpful votes