Can I upgrade my 3750 48TS-S to the EMI software or does it need to be a 48TS-E?Thanks!
Can I upgrade my 3750 48TS-S to the EMI software or does it need to be a 48TS-E?Thanks!
Hello,I recently purchased a 3560-X and i am just in the process of setting it up, my question is there a recommended way i should connect it to my ASA. Just playing around i was able to setup a routed port on the 3560 and connect it to the ASA and e...
Hi allI am having a little issues digesting the topic: ip multicast helperhere is the cisco Doc:http://www.cisco.com/en/US/docs/ios/ipmulti/configuration/guide/imc_inter_mc_helper.pdfif i want to have bidirectional connection between 2 networ...
One of my sites with a 2811router and IOS 12.3(8)T10 is configured for DHCP service leasing addresses for 30 days. When my Wyse thin client boots it requests a IP address for PXE and then for the OS. The PXE address should only lease for 5 minutes ...
Hi, Is there a command which could tell for how long a particular switch has been the STP root ?
I have 2 - Nexus 5548's connecting to a 3750x stack. I'm trying to bring up a trunk between the a Nexus 5548 and the master switch. The trunk will not come up. Is the native Vlan a requirement? Below is what I currently have configured. I have t...
can anybody explain with an example use of dhcp snooping?
Hi,We own several WS-C4506 with Supervisor II+ running IOS image 4500-ipbase-mz.122-31.SGA6.bin,i want to utilize the mgmt port for out-of-band management but i can't find it on the interface list.Does anyone know how to activate and configure this ...
Hi all,I'm currently quite baffled with the problem I'm encountering. I hope you can help me figuring this one out. My setup is as follows:I've got four nexus 7k's as core switches. Two of them per datacenter. Connected to them are 4 5k's, again two ...
Hello,I need to know diffference between command ip wccp 10 redirect out andip wccp 12 group-listen
Hello there, I am hoping someone can answer these questions for me. I know that the ASR 1002 has 4 integrated ports but the problem that I am having is that I need two of those ports to emulate a L2 switched port. Is that doable? If not than I need t...
Are 887VAM-W-E-K9 and 800-IL-PM2 compatible? We have got both of them but it seems that router has a 30W power source and module has a 80W power source. Is there any document to clarify this? Thanks!
Guys, I am facing problem with Cisco 4948 switch and got reloaded 2 times automatically. We are not facing any issue before & after reloading. Please see below error:4d12h: %C4K_SWITCHINGENGINEMAN-4-FATALERRORINTERRUPTSEEN: 4d12h: %C4K_HWPORTMAN-4-...
I have a Catalyst 4006 switch in a test environment which I have setup as per the below link. The setup works fine but I have a few queries.http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a0080094959.shtmla) When I execut...
Hi,I am building up vPC on 2 x Nexus 3048 and found that it did not work properly.The current config as follows,1. OS: n3000-uk9.5.0.3.U2.2.bin2. Peer link: 10 x 1G (E1/1 - E1/10) on both devices (I am wondering that 1G interface supports vPC Peer-Li...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-13-2024 06:43 AM | ||
08-06-2024 12:40 PM | ||
08-05-2024 10:24 PM | ||
08-04-2024 01:12 PM | ||
08-01-2024 10:26 AM |
User | Count |
---|---|
9 | |
7 | |
5 | |
4 | |
3 |