Switching

I have an microsoft exchange server that is creating CAPI2 error messages because internet tests are failing. Internet access for the exchange server is blocked on the firewall.Microsoft Explanation:This problem occurs because the affected computer c...

Dear allwe have 3 Cisco SMB SGE2010P 48 port Gigabyte switch and another 1 Cisco WS-C3750G-PS-S Switch and the Cisco 3750G is the Root Switch and Core too.but when i create vlan's in the 3750G switch and i have configured 2 ports of the switch port a...

Hi All,I have cisco 6513 and cisco 7609. I want ro resolve both my router and switch's hostname when I ping them.For eg: If I ping the IP address of my router, instead of replying from its IP, router must reply through its hostname.Hos is it possible...

Hello, My name is La Marr     I am having trouble configuring an ip address on a 1841 cisco router in fa0/1.  All my devices are talking to one another, but I cannot ping the entire network because I cannot assign the ip address to fa0/1 on the route...

Hi,I am planning to design the network for video traffic movement . attached digaram designed for in this regard. could you please check and notify me if i am on the right track .Thanks in adavnce Any help is much appreciatedThanks

Hi all,Has any one seen a message similar to this one before ?It started happening after I reboot my chassis during a IOS upgrade.Until then everything was working as expected.This is basically my configuration:6513 chassisRedundant WS-CAC-6000W powe...

HI all,CPU utilization of Switch found as 90-95 % after converting switch from CAT OS to IOS...PLs find details below..*************************************************************************************************IOS :s72033-ipservicesk9_wan-vz.12...

Does anyone know if rate limiting will work on a 2924XL?  The switch is running IOS 12.0 (5).  If anyone happens to know whether or not this can be done, can you please provide the command?Thanks!! KJ

Recently I've been creating redundancy to switches that our servers connect  to. I've been creating a redundant link by connecting them to our secondary root switch. One 6509 is the primary for all VLANs. That will change soon, hopefully.I've been co...

I was just wondering if anyone knew if the IE 3000 with the 12.2.55SE IOS supports NAT?

I have a WRT54GH connected to my main computer and cable/modem, and it cascades into a WRT54G LAN-LAN via Ethernet Cable.  Both work fine, and each has a different name and IP address.  They are placed in different parts of the house.When I configure...

Hi FolksWith two 6509-E Based VSS , do i still need 2 FWSM and 2 IDSM-2,coz the VSS makes logicaly two switch in one switch

The primary switching network in our company is a hub and spoke topology and consists largely on Cisco 3750s. We use this to carry our main corporate network.We also have what is refered to as the Contractors network. We use this network for, yep you...

Is there any model of Cisco Catalyst switch with support of 802.1v and sFlow? If not, is there any Cisco alternative?