Switching

What is the best practice for backing up Cisco devices with regards to schedule (should it be weekly, daily or only after every change), backup management and related documentation.

Okay so I have a basic home lab, 2600 router x2 and 2900 XL switch x 2. I've connected each router together (they "see" each other in cdp), and each router to one switch. My problem is that the interfaces that the router connects to the switch won't ...

What are the issues encountered if i have two paths for outbound traffic and single path for inbound traffic.Majority of traffic is outbound.

Background. 4 switch 3750 stack. Switch #4 is the master.We have the following QoS cos-maps setup on our switch.mls qos srr-queue output cos-map queue 2 threshold 1 2 3 4 6 7mls qos srr-queue output cos-map queue 2 threshold 3 1mls qos srr-queue ...

Hi allI was reading my cisco book this morning, there was some info on spanning tree, basically like a diamond shape connectivity between 4 switches, all of them have connection to each other, what I want to know is, how do I find out what the design...

Hi, My asa device has 3 external ip address. On of the addresses is used for static pat to a host on the inside network. If a inside host tries to access the external resource not using the asa as the default gateway it works.If the inside client use...

I'm having an odd issue with a Catalyst 6513 and its http interface. The http interface has been working just fine in the past, however it just times out now in the browser. Now here is the interesting part. If I'm logged onto the switch console w...

I have a catalyst switch c3750 which i want to do vlan with it. I have vlan 1 and 2 on it.Vlan 1 ip addr 192.168.1.1/24vlan 2 ip addr 192.168.2.1/24And i tag each port to each vlan, port 1 and 2 precise.I then have host A ip addr to be 192.168.1.3 ga...

hi,gurusI want to connecct unmanaged swith to the managed switch through trunk port.If i configured switchport on managed switch like belowinterface fa0/1swichportswitchport mode trunkswitchport trunk native vlan 5what will be result?machine connnect...

Hi Experts,I have one global nat with IP 195.24.4.XX (i have some number of public IP's)when i want configure outside nat to one private IP 10.246.6.XXX (SMTP server) with public IP 195.24.5.XX every time its going out through the global nated IP onl...

Can I use avaya phone without trunking the port?set vlan 10 (data vlan) mod/portset port auxiliaryvlan mod/port 20 (voice vlan)

how can I enable ssh on 3548 XL?

Hello,We have 2xFWSM that running on 2x6509 in production environment and these 2 FWSMs is running active/standby mode. There are FW version 2.3(4) that running on these FWSMs. We want to upgrade these FWSMs with less downtime and impact for producti...

Does anyone have experience with failing rapid PVST when it used in a large network with + 50 VLAN's.What type of STP is recommended for that type of network?Thanks