Switching

So from other testing and my understanding if i do this:line vty 0 15rotary 5then i should be able to telnet to this device on port 3005.I have done this on routers before, and when i tried it on a 2 differnt 6509's i could not establish a connection...

Wondering if you've encountered an issue with Cisco Network Assistant v5.4. With the previous version(5.3) I could see and modify all my cisco switches(<40) but after upgrading to 5.4 I only have access to the WS-2950 and the WS-4507R models. I can't...

I have a 3550 (c3550-ipservicesk9-mz.122-35.SE5.bin), an ME3400 (me340x-metroaccess-mz.122-40.SE.bin) and two MRV 912 switches. All three support MST, which (by all indications) I think I have setup correctly.- 3550 F0/1 connects to 3400 F0/1- 3550 ...

Hello,I would like to know the permitted non operating (storage) altitude of the router 2811 and the Catalyst C6500-E.Is it possible to tell me which document I can download (or send it to me) so that I formally show the evidence to my customer ?Than...

Dear All,I have cisco 2950 C24 Switch which has some problem and and stopped at switch:i had tried after rebooing but the same problem is there.I have attached the capture fle for your refferencce .......Pls help me to resolve it .....Dipesh P

Hi,When I run the command below I get no statistics. Can anyone tell me if I need to configure the switch to enable this (enable) sh qos statistics 5/1Tx port type of port 5/1 : 1p2q2tQ3T1 statistics are included in Q2T2.Q# Threshold# Packets ...

Dear Friends,Just wanted to know that if i put the native vlan for a trunk port, should it exist in the vlan database of the switch?For example, if i define a native vlan 900 for a trunk port, should vlan 900 too reside on the vlan database of the sw...

How do I go about checking exacly how much memory I have on the device and what processes should or should not be consuming majority of the memory.I have been advised that the memory usage has been increasing. At which point do get concerned about me...

Hi,anyone who has experienced about below logs ?.Jan 28 14:37:05.208 CCT: %ETHCNTR-3-LOOP_BACK_DETECTED: Keepalive packetloop-back detected on FastEthernet0/22..Jan 28 14:37:05.208 CCT: %PM-4-ERR_DISABLE: loopback error detected onFa0/22,putting Fa0/...

Hi, I need some assistance on the following : -i) What is a SIP MAC Addreess within a switch/router ?ii) how does a switch detects a spoofed mac address ?iii) how do I check for the highest MAC address flow count inside a switch/router Thank you,Chee...

We use IAS for win2k as our radius server to authenticate users. In our Cat3750 switch to configure the following command: ================ aaa new-model aaa authentication login default group radius local aaa authentication login ConsoleAuth local l...

HiI have a network with a 2948G-L3 switch, a 2950 conected to it and another 2950 connected to the first 2950 (refer to the diagram). I am getting a lot of runts and corresponding number of overruns on the 2948 switch. It started a few days ago and s...