Switching

All,On 6509 with CaTOS 8.6(4), is there a command to display LACP local and neighbor status (such as up or down, slow mode or fast mode, passive and active)? I have tried all options of "show lacp-channel", but I could not get the info I need, especi...

Hi allI'd like to hear what you folks use to analyze traffic. I've come to a point where I need, down to the minute, statistics of traffic flowing in and out of a GigE interface and since I've mostly worked with sniffers before I need some suggestion...

I have a 4506 acting as a HUB and about 5 3560's configured as STUB. All of the 3560's connect to a layer 2 switch which is plugged into one port on the 4506. If i configure ip summary-address eigrp 1 0.0.0.0 0.0.0.0 on that interface, will it propag...

Hi,We have tried applying an additional HSRP group on a subinterface on a 7200 router, but we receive the following log message, even before we apply the standby settings on the secondary router.Jul 12 19:06:53.895 BST: %STANDBY-3-DIFFVIP1: FastEther...

Hello,After enabling IP routing on the switch, it refuses to accept or transmitt the ping replies. Any idea?

Hi guys,Just some question that might sound stupid at first:What would about be the possible gross data rate on a 10GBit fiber link (e.g. 3750 uplink to a 65xx via singlemode fiber)?As far as I understand, all of the 10gig fiber optic standards do ha...

I have attached the parts I need to order to upgrade out CAT6506 and CAt6509. Can someone doa sanity check to see if I have missed anything. I have added a line card to improve switching speed.

Dear Guys,I come up with an another question and that is i have given a project of implementing vlan's, redundancy including core network deployment for DR site. The problem is this that we have more than 100 servers running mail, domain, database, S...

Hiif i enable two polices on switchport that are mac-address authen and dot1x.My question is what policies will authen first ? Thanks

I am using Cisco Switch 2950 with IOS 12.1(9)EA1. I want to download the latest IOS to upgrade it. How can I from the Cisco Website find out the latest IOS and download the software?

interface FastEthernet0/6 switchport access vlan 30 switchport mode access duplex full speed 100interface FastEthernet0/12 switchport access vlan 20 switchport mode accessmonitor session 1 source interface fa0/6monitor session 1 destination interface...

i dont't know when to use this commend of "no ip redirects"in routers interfaces,and what this commend mean?