Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, November 4, 2024 through Friday, November 15, 2024. Our colleagues Rohit Chopra, Vaibhav Aggarwal, Anuraag Majumdar, Saquib Zeya...
Forum Posts
I am experiencing intermittant issues with printers simply dropping off the network. Every couple of days, the print queue will die and the printer stops responding to ping. Ping from another another PC on the same subnet and then it appears to "wa...
I have an non-Cisco L2 switch that needs to connect to a Cat 6509 via etherchannel using LACP. How do I assign a VLAN/dot1q encapsulation on the etherchannel/port-channel on the Cat6509 to identify the VLAN.Here's my config;6509-SW-01#sh run int fa3/...
I'm faced to a problem to find information about keepalive on Ethernet Interfaces: why and how it works.Anyone can explain or send me information about?
Hi,Can any body help me in getting the maximum limit for interface input/output packet counters on 1700 series routers.The "show interfaces" CLI will show these stats for each interface on the router.~Kamesh
Hi guys,I'm trying to configure a 2611 router (IOS 12.2) for vpn, so that vpn clients can connect to it.As of now, my int e0/1 is using the 10.0.0.0/24 subnet, and I also have a dhcp pool that assigns address for that same subnet.Hence, for the pool ...
Can anyone give me a definitive answer, that when connecting on isdn each end has to be on a common subnet ? a see people connecting to a number and just pushing a route to a number more or less !!
Hello,we are confused about the IOS Licensing.We want another Image from IP+ to Crypto use. Must we buy this software or can we download this within the Smartnet??cuRonny
I have try load balancing different voice vlans on 2 Cisco 4506 using hSRP and it don't work. Wonder any one have try out this ! Or is it that voice does not support asymmetric routing
Hello,How is the configuration for booting the config file from a tftp server after a power reset on Catalyst 3560 switch ?RegardsPascal
Gurus,Mine is a basic setup, with only two Vlan's, DATA (100), and VOICE (907). I have 3 Cat 3560's. I did not create this arrangement, and am quite a newb in the Vlan area.I have a group of engineers coming to my facility for about 5 months. I want ...
Resolved! BGP Datagram size
Dear all,on one of my router(MPLS Service) the BGP datagram size shows asDatagrams (max data segment is 516 bytes)and on another router(ISP Service) it showsDatagrams (max data segment is 536 bytes):Can anybody tell me the reason of such differenceRe...
how to check the l2 and l3,active mode on a 6513 switch ?
I need some help doing some manual tweaking with MST(STP). Here is the scenario.We have two load balancers with two uplinks (gigabit) going to two 6509s (one link each for a mesh configuration). There is a primary and a secondary load balancer.The se...
How do I setup valns between a PIX 506 and an Aironet 1231, to allow for 2 ssids? I want one SSID to be open and the other to be secure.
Hello, I have an 1841 router, with a wic card. Users on this router connect out to the net through pppoe on fa0/1/dialer1, and the internal lan is 192.168.11.0 network.2 of the machines on that lan won't browse to certain sites. msn.com, intel.com...
