Switching

I have been trying to upgrade switchto IOS image through console port buthyperterminal does not work with xmodem transfer. Cisco affording different docsbut nobody there can solve this problem.There are too many inconsistencies in their docs that do ...

Is there any disadvanatages to stacking. or is there a reason why i should stack?

Hi all,im starting to think how to do a redundancy between my 2 cores switches (4506). So I did a topology (attachment) and i'd like some help about some questions.About the connections, Should I plug the switches like the picture? Or not? How should...

Hi,We have a 6500 box and I'm seeing my pause output counter increment. Does that mean that the device connected to the port can't keep up with the data that it is receiving or that the port can't keep up with the data coming from the device that is ...

Does anyone know if there are plans for support of Netflow on the 3750 series or any of the switches that can support Layer3.I have looked at the command references and it sas that the flow-exort is not supported as of the latest code level.

We are looking into the VSS implementation. We have 3 6513 switches and would add 3 more running VSS. My question is do you need dual sup 720's in the switches when running vss? Can you use only 1 supervisor per switch while running VSS. On the websi...

Is it possible to do any kind of ip accounting on 6500 hybrid box ? Haven't found any info on CCO.

hi mates :)I'll appreciate any help about below described problem;Customer asked me to implement QOS on his 4503 switches.- it is a simple Layer 2 network without VLANs. - two 4503 switches are connected to each other using etherchannel- some compute...

Hi, I want t relay the DHCP information to my DHCP Server. That is I need to send the NAS IP address and mac address when requesting IP from DHCP server. The Router is GSR with c12kprp-k4p-mz.120-32.SY4.bin. Seems the IOS doesn't have this feature. ...

This is probably a simple one but I haven't found the answer yetIn spanning tree there is a number called the "designated port id" that can be seen by doing a <show spanning tree detail> the number looks like 128.2 if you do a <show spanning-tree act...

Hii experts,,Is there is any way to upgrade the catalyst 2948G with model number: WS-c2948G series from CatIOS to Cisco IOS.Thanks....

Hi,I'm trying to configure NAT on a stick just as a learning exercise in my home network. I followed the instructions on Cisco's website (http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094430.shtml)and also an article on...