Switching

Our head off we have 2811 router using class C IP Addressing. Five branches are connected through head off through lease line. Head Off LAN can use only 254 host now host are going to increase, how I can do this. Experts can u guide me.Regds

I wonder if anyone could tell me, Cisco website link to find out end-of-sale and end-of-life information by entering a Cisco product model number. I have 1000 different products for which I need to see this information (End-of-Life End-of-Sale).

Hi,I think the "Cross Stack" Etherchannel feature in the 3750 is awesome.The ability to loadbalance a server across two switches and obtaining double the bandwidth too .... a truelly fab design for 'redundancy'.Why is this not available on the 4948, ...

we had an issue at one of our site where we have 2 Windows 2003 Print servers. We have approx 80 printers configured on both of these print servers. One is the primary and the other is secondary. Both the print servers are connected to our switche...

I got this when I tried to enter the QOS on the channelLAB_n0qc5core1#conf tEnter configuration commands, one per line. End with CNTL/Z.LAB_n0qc5core1(config)#interface range GigabitEthernet5/1-2LAB_n0qc5core1(config-if-range)#description Link betwe...

hi...i have given a uplink to cisco 2960 switch which in turn is uplink to another switch(2960)..now my problem is that i m able to access the second switch(telnet,WebUI) but not the first switch...cannot guess wat might be the problem...bcoz if the ...

Flash a stacked switch, will the flash upgrade all switches in the stack?

Our server team has just come to us with a new VMWare project. They are a little unclear on exactly what we need to configure out switches to work for them. Can anyone with some VMWare experience let me know what needs to be done for the configurat...

I have an ASA and i have a 24 port switch. The first half of the switch is in vlan 2 and the rest is in vlan 3. I want to have the management interface connect to the switch and have access to both vlans. Is the possible?

Ok, I know there are many previous posts regarding STP, but could not find any that were exactly like my configuration, so here goes.We have 2 6500's with 720's at the core, and another 6500 with a sup1a in another bldg, all with redundant links. We ...

I try to configure a asa5505 and a AIR-AP1131 to communicate over a trunk. A PC connected to the ASA / Vlan-3-Port is able to communicate and is able to get an ip address via DHCP from DHCP-server for VLAN 3 an the ASA . Connecting wireless to the AP...

I was not able to "un shut" Interface Vlan 10. Switch took "no shut" with no complains but interface stays Admin Down. This is on a WS-C3524-XL-EN Version 12.0(5.2)XU.Below is the config.SFS-EMC-Switch#sho runBuilding configuration...Current configur...

Hi all,I'm looking for an IOS-Image with PBR for the following module:Sup II+10GE 10GE (X2), 1000BaseX (SFP) WS-X4013+10GENow I'm working with the cat4500-ipbase-mz.122-31.SGA5.bin image.Thanks,Norbert