Resolved! VTP identify id changing
How to change this identity ip address in VTP which shows the switch ip address that modified the last changes. right now its 0.0.0.0 . how to give or change this ip address to one of vlan ip address?
Forum Posts
Hi,There is a vulnerability on ip identd for Cisco IOS and IOS-XE. However, when I tried configuring "no ip identd", switch return invalid command. Latest version of CIS benchmark released in Jun 24 are still checking on this command and with the aud...
Hello, We have Cisco ISR 4221 that has a login local account setup to login to the router that was setup by a previous engineer that is no longer with the company so we are not able to login. I can not confirm the confreg. One of the steps says to "...
So I have a network where I need to do inter-Vlan routing. I wanted to ping a PC from a switch and I understand why you would need to configure a default gateway on the switch so that the ping can be sent correctly but what I have trouble understandi...
Can someone help me create ACL? I want to got acl for 192.168.x.0, x=vlan 10,30,40,100 in site a and this network should got access to some dmz servers. Server ip FTP - 10.66.0.3, HTTPS-Syslog - 10.66.0.2, Email - 10.66.0.4 DNS - 10.66.0.5, vlan 20,...
Hello,I'm using a Layer 3 switch at the network access layer. please suggest some security hardening measures?Thanks
C9200-24P spamming to log:%IOSXE-3-PLATFORM: Switch 1 R0/0: kernel: i2c i2c-5: SCL is stuck low, exit recovery Same issue in 17.3.4b, 17.3.5, 17.6.3, 17.7.1 Power Supply A not showing in “sh inventory” but showing in “sh inventory fru”Power Supply A ...
I everyone, I have a Meraki-MS2250P switch and a linksys LGS352C and I want to connect them by a SFP fiber port, do you know if this is possible?
Hi, Is there a difference between Configuration Professional Software for Catalyst and IOS UNIVERSAL WITH WEB BASED DEV MGR for c3560-cx-12pd?https://www.cisco.com/c/en/us/support/switches/catalyst-3560-cx-series-switches/series.html?dwnld=true&dwldI...
I need help in establishing an IPSec connecting between two sites. i want to set IPSec between r1 and r2left router is R1 in the outside i've got the network 10.0.0.8/30, 10.66.0.x/24 - x is a diferent serwers in the netowrk,and 192.168.x.0/24 x - it...
How to enter the ROMMON mode in 2960x switch?
Hello, we bought c1300 switchthere is no "archive" command, is there any way to autobackup this switches via TFTP?LAN Switching, с1300
Resolved! vlan routing
Hello,I am unable ping to router Int/0.my router int/0 is 192.167.1.1I have layer 2/3 switch. i have 2 VLAN(default 1 and VLAN 10). VLAN 10 IP address 192.167.10.1/24.I setup switch int on te1/0/1 as layer 3 with ip 192.167.1.2.IP routing 0.0.0.0 0.0...
I have a question on LLDP timers related to TTL (on Catalyst switches) I’ve seen some references that the TTL is the multiple of the Transmit Timer times the Hold Time Multiplier.Looking at my switch (an old 3650), I cannot see or set the Hold Time M...
A curious situation found on initial fresh-out-of-the-box setup on a Catalyst 1300 (running v4.0.0.93)When prompted to set a new username/password, a password was randomly generated ("uU&5Oo2!JfeQmjsB") and entered, only to get this response:"Passwor...
