I want to connect 2 NIC from server to Switch to increase banwidth, the questions is:1- Can I configure 1 IP address for NIC.2- What functions of the switch support.3- How do I configure step by step.I use Cat 3560
I want to connect 2 NIC from server to Switch to increase banwidth, the questions is:1- Can I configure 1 IP address for NIC.2- What functions of the switch support.3- How do I configure step by step.I use Cat 3560
I've been asked to help a customer who has a Sup II fitted into a 4500 chassis. He has tried to upgrade the IOS on the switch and somehow in the process lost the boot helper image. So now the switch is at ROMMON, and wont load the IOS, probably due t...
Hello!i have to know when you configure frame-relay on some interface and you can't ping ur own interface!here where the Problem and how can i resolve like this problems10xs
hello anyone has faced like this problem before:R4(config-map-class)#FRAme-relay fragment 64000 ^% Invalid input detected at '^' marker.R4(config-map-class)#10xs
Dear Experts!I Have to know where we use these Commands:1)ip drp server2)ip wccp web-cachMulticast:ip pim dm-fall-backip send-rp-announce Interface..many 10xs
Hi,i would like to set up in my 1600 branches offices a bootp server. Does anybody know a free bootp server running in windows 2003.Thanks
team,i am getting the below error can anyone help us understand why the same is occuring again and again.>>>>>>>>>>.Nov 18 08:10:35: %C4K_IOSMODPORTMAN-6-POWERSUPPLYFANGOOD: Fan of power supply 1 is okay.Nov 18 08:12:55: %C4K_IOSMODPORTMAN-4-POWERSUP...
I have my ports configured like this.router - L2 3750G switch - 6506 (port allocated to FWSM Module)3750G configint g1/0/1desc "Router"switchport mode accessswitchport access vlan 5spanning-tree portfastspanning-tree bpduguard enableint g1/0/2desc "t...
I'm trying to find out what the part number is for the flash card that fits in the front panel slot on a C6K supervisor 2 card. I cannot located this information on Cisco.com, so can I do this, and if so can anyone tell me the part number?Andy
On average, how many PC's or devices should there be in a broadcast domain to main a healthy LAN network.
It says that this card has a single 20 Gbps connection to the switch fabric.Does this mean 20 Gbps full duplex?Since there are 24 ports, are we getting 2.4:1 oversubscription with this card?If this is the case is there any other gigabit sfp based car...
sir i would like to know if i can uplink switch Cisco 3560 using SFP module to other cisco 3560 switch using same SFP module , meaning if the switch can be uplinked to other switches .
I need to now how long gigabyte port has been up (connected) in a Cisco 3750 switch. What command permits me to know this?.Thanks.
Recently configured Microsoft RADIUS to authenticate VTY users for our Cisco devices.The goal was to authenticate using Active directory domain groups. Everthing works great when we specify PAP as authentication method in RAS policy but when we try t...
Hi,I have a fast Ethernet interface 3640 router directly connected to a gigabit 4507 switch interface. Once connected y have just time to see port and protocol getting up on my 3640 router before freezing.The 3540 has 12.3.24 ip plus ios installed. I...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-09-2024 11:34 AM | ||
10-09-2024 11:22 AM | ||
10-08-2024 08:34 PM | ||
10-08-2024 12:54 PM | ||
10-08-2024 01:38 AM |
User | Count |
---|---|
8 | |
8 | |
7 | |
6 | |
6 |